Viewing all customer Discussions for:

23-041 Mirror Wardrobe Door Roller Assembly

This is the plastic part inside of the metal assembly.

numbers 4013-1 &4013-2 for each side of door acme #4011 the bottom rollers are nylon about 3/8 inches wide & 1"3/8 round or 1"1/2. maybe there is a left & right for each door. acme 4011 is stamped on framem. also part #4013-1 & 4013-2. does any one know if these can be found or is there a replaceme ... (cont.)

I have been looking for a replacement for the part pictured in the attachments. It looks similar but not exactly the same as the part you have listed as 23-041. Do you know if the 23-041 is a replacement for the part I have pictured. The part has an imprint of Stanley 4011. Thanks, Jacob S ... (cont.)

I need to replace the wheel on my closet door. The existing wheel is a STANLEY UK PAT GB2321661B

Hi Swisco! Attached are pictures of my mirror door rollers. The outer piece is stamped 4012 and the inner piece is stamped 4011. Do I have to buy the whole roller or can I just buy the plastic wheel which is the only piece that broke - the ridge/lip that hugs the pin that it's attached to broke off. ... (cont.)

I purchased doors from Home Depot, and believe they are from your company. The part number in this thread is 23-041....I have a pic of what I need and have attached our old wheel (several have broken off), and the new hardware that came with a new set we bought this summer. We installed 3 new sets a ... (cont.)

I have attached two images and was wondering if you could please let me know if these parts are available to purchase? They are for sliding closet doors. The bottom roller has STANLEY 17-4264-000 stamped on it and the top roller has STANLEY 17-4207-000 stamped on it.

Can you tell me what part I need?

Hi the too ones have a code 4012 on the bottom and 4014 on the top Thanks

Need this replacement roller for mirrored closet doors.

Installed a 8' door set about 15 years ago. Over the past few years the lower track has begun to curl upward away from the floor. This has occurred slowly and began to affect the ability of the doors (one in particular) to slide easily. At this point, one door cannot be opened without brute force ... (cont.)

I am not familiar with the given numbers but would be happy to research it for you. Please reply with detailed photos with measurements.

Can you recommend a replacement? The door kept jumping it's track. It has no markings or anything. We noticed after removing it that there is a piece that slides down possibly locking it in the track. The wheel is wobbly and the track is rusted. Please contact me for any more info needed. ... (cont.)

I have (old) mirrored sliding closet doors. Each is 48 inches wide. The doors will not pass each other on the track. The bottom roller is marked Acme 4011. I believe it is uses part number 23-041 as it has convex wheels (see photo). The doors are 1.25 inches wide, including the beveled outside ... (cont.)

I have some closets I am trying to redo. I am trying to find the wheels which have ACME 4011 stamped on the metal frame of the wheel assembly.

The outside part at the top shows number 4012. It also indicates on the inside part ACME 4011 with a U.S.PAT. 3,058,173 and PAT CAN. 1963. The part is 4" high by about 3" wide. I need two (2) of these.

Attached are 3 images of the bottom roller assembly - two of the frame and one of the entire assembly with the roller assembly mounted. The frame that I have is missing the roller assembly and I need to find one or the door will fall apart (again). The frame has 2 locking tabs on the bottom and th ... (cont.)

Hi, Need a replacement for a broken glass door roller. Attached is a picture of a working one.

I need a (2) 72" bottom tracks for convex wheels to replace the one in the attached photos. This is for sliding mirror doors. Tracks are about 1 5/8" on center. Wheel track width at about 3/16". Please let me know the part number for the correct bottom track in white so I can order. Thanks, ... (cont.)

I appear to have Roller# 23-041 on my sliding mirrors and the track is a mess and I want to replace it. The length is approx 72" and the width is 3 3/4". The current color is white but I'm open to other colors.