Viewing all customer Discussions for:

26-338 Sash Stop

Hi, I am looking for this piece that all my windows have and most have broken. In order to lock the window open just a small portion.

Hello, I am looking for 6-10 tilt-in window limiters. I have attached pictures of the broken limiter.. the space and an operational one. The slot for the plastic insert is pretty small. 1-1/16" x 3/16". It is not necessary that the style exactly match the existing ones. Any help would be greatl ... (cont.)

This is on the inside of all my windows on each side. Most are broke and missing. This one is broke and has paint on it. What is it where can I get a replacement?

These clips are on an American Jewel vinyl replacement window series # 1100 to prevent the windows from being opened when they are in the vent position. I've located all the other parts for these windows on your site except for these clips. I am a retired structural and ornamental steel fabricator. ... (cont.)

Do you know if there's any "codes" that say these sash stops cannot be used in certain (i.e. bedroom) windows?

I have about 20-year old windows. They are 2-piece sliding windows (up/down). I am looking for the small plastic locking tabs that you can pull out to prevent the window from opening no more than a few inches. They are flush above the middle of the window, but can be pulled out and locked in plac ... (cont.)

I need to order 12 window stops. Please let me know if you have these available Thank you Lloyd

I am looking for a replacement for these vent stops found in Jen-weld vinyl double-hung windows, stamped "INE 96" on the inside of the window frame in between the two window panes.

Need your help on this looks like 26-338 might fit

Trying to fix a window with several problems. 1. Missing slide latch on right that allows window to tilt out. Slide is 2 inches and slot it is from is 7/8 inch . see picture. 2.Have broken window stoppers or "sash stops" I believe. 1 1/8 inch long unsure how wide. 3. Top window falls down wi ... (cont.)

Hi: Have 3 windows missing their vent locks. Existing slot is approx. 1" long and 1/4" wide. Do you have any replacements for this size? Thanks, Frankieb

I am looking for pop up vent latches for what I beleive were Dove double hung windowa installed in the late 80's early 90's?? You have a similar one (26-107) which is close but not quite the dimensions I need. Do you have any other ones like that one? Thanks for your help. Howard ... (cont.)

Thank you! I got my order with sash stops item #26-338. But 5/32 size is too big for my aluminum tilt windows. My question is: could you send me sash stops like 26-338 with 3/32size instead of 5/32? Sincerely yours Vsevolod

I purchased 26-122 : Vent Latch - they don't fit. I am emailing pictures of the existing vent lock. The ones I ordered are not the right size

Hi, Please help identify, it has a number 3 stamped on it, need 10 units Thank you Jorge PS: on this one a little flat part is missing right about the opening. correct size is: top across 1-1/8" right side from top to bottom 3/4" left side from top to

need security tabs for about 4 windows . Don't know if the one you sell will fit . Thanks Scott

I need a vent lock or a sash stop. Its similar to the picture from a homeowner in Connecticut on 7/19/2010. The 26-106 was recommended. the item I have on my 1992 silverline vinyl windows is called a sash stop I believe. I'm not sure which item to purchase the 26-106 or the 26-338. Can you advise me ... (cont.)

Dear Swisco, I've recently placed an order for a window/vent stopper 26-107, however it appears that it was the wrong size as it is too large for my current frames. Please let me know if I would be able to return the current order and let me know if you have the stopper size I need. Thank you, ... (cont.)

In need several of these small night latches for our windows. The windows are the vinyl glue/seamed type. We had everything replaced when we moved in our house around 2003. The company (Window Wizards) has since closed its doors and I've been trying to source replacement latches. Any help? Than ... (cont.)

How do you install Sysco Sash Stops on vinyl windows?