Viewing all customer Discussions for:

75-077 Slider Slicker Track Lubricant

Original roller with 3 rivets needed as replacement 7/16" width rollers (M.F.S.) to not fit as the arm on one side makes it 1/2" width which is too tight

Hi there, I am helping my friend fix her sliding glass door The center door is the only pieces of glass (there are 3 panels tot) that moves and one of the rollers popped out. Ideally I would like to replace both rollers, use the existing frame and glass, but I cannot figure out how to get the s ... (cont.)

I want to replace these single rollers on 4 or 5 doors. Therefore, order 10 rollers. Just need to know which roller to order. Do I need new door track covers?Length; 2 5/16"Height; 15/16"Width; 9/16"

US PAT 2203427 https://www.google.com/patents/US2203427?dq=patent:2203427 This is the system I have... c.a. 1940 Detroit My question is this: any parts around? also, could the wood sashes be saved and used in a modern balance/track system?

Hi I have just discovered this company, I am hoping you can help us replace this old roller? There is no brand on it and we have no idea if you can find these but they are shot so please let me know! Thanks!!

Looking to replace these wheel/mount parts for my doors. Each door takes two, so I need four in total.

I have a number of patio windows with rollers that need to be replaced. Each window has two roller assemblies, and each window weighs 20-25 lbs. Since the windows are exposed to water, the roller itself needs to be plastic, like the existing ones, or something other than a metal that can rust. Atta ... (cont.)

The nylon blind nut for the adjustment screw is stripped and I'm not sure if it can accommodate a larger screw since it is very brittle. Can I replace this part? If not, what are my options? Will an 84-074 fit in the same cavity as my current assembly? Thanks in advance, Robert.

I have included the sizing as best as I could see. Photos from all views.

This old part is L-3 inches long, W-3/4, H-1 1/8. Wheel is 1 1/2 diameter. No part number. The area inside the door space. From bottom of door up to glass = H-1 1/2 inches, this is open space to the other end of the door. Inside diameter

Need 2 rollers and one door hardware. Roller box is 1 1/4 inch by 2 1/4 inch. Wheel is 1 1/4 inch across.The RV is a park model manufactured in 1991. The sliding glass door was manufactured by General Aluminum Products, Inc. In Charlotte, Michigan.

I need to get replacement part # for these rollers please. 1-1/4" wheels

Sirs, I have two sliding patio doors that have become very difficult to open and close. The doors are about 8 feet tall and quite heavy. I was no longer able to adjust the wheel height and I assume the wheel assemblies are rusted or corroded making the adjustment difficult. I also no longer have the ... (cont.)

It came off of a sliding glass door.

I need two new rollers for the PGT series 2500 sliding glass door leading to my lanai. The home was built in 2004. Can you please identify the roller assembly for me and place an order for two of them?

I have a Themal Industries patio door and the handle continues to break at one point. When the company was in business, it was easy to find and send me the part. Now I am hoping you can help me. Attached is the picture of the piece that continues to cause me problems. It's 7 1/2 inches long and ... (cont.)

For this roller, which will get water falling in from outside the window, should I lubricate the roller after it is in the window frame? Any suggestions for a lubricant to help this glide along the aluminum rail/window frame? Thanks, Wannabe

Need replacement roller for 45 yr old Peachtree door. Bearing is shot and roller gets jammed.Are these photos adequate to identify the replacement Swisco part. Thank you for your assistance. Buster. I will replace two rollers.

Hi, I am looking for the screen door latch on peachtree sliding glass doors and the rollers at the top and bottom of the doors (there are 4 to a door). Photos are attached with scale There were no discernable part numbers but the latch has a patent number 4480862and logo "PD". The latch has 2 piec ... (cont.)

I need your help to identify what replacement operator will be suitable for the awning window. I also need a new white crank and crank cover. And if you have a lubricating spray I would like to order that as well. Thanks in advance for your help!!