Viewing all customer Discussions for:

39-109B 3/8" Handle for Pella

Hello,I recently purchased a house built in the 60s with wooden Pella crank windows. From what I can tell. Some are missing the crank mechanism as indicated in the picture and others have a broken lever or the piece that slides in the track to make the window open, on the window side.Would you have ... (cont.)

I dont see any numbers on the handles. If you have them, I would need to buy a few. Please let me know. Thanks Mark Avila

The crank appears to be stripped out in our Pella window. Photos and measurements below. The window is also labeled with the following "PELLA - 0798 - DCCCMRH1Z1 - 021A047ATAN - 521S - NFRC". The window swings left when it opens.

I would like to order four crank handles. The ID of the handle appears to be 3/8 x 3/4 deep

Hi! I got a loose crank and looking for the replacement. My house was built in 1987 so the model must be old. Would be much appreciated in if you know the model from the picture. I believe it is an Anderson window. best regards, Bill

Looking to identify a 1990's Pela window operator. Window opens from left hand side.

Looking to replace the crank mechanism for these Pella windows. As per my client, they are 1994 Pella Reserve Traditional Casements. Thank you!

Hello We'd like to replace these Pella casement window cranks with folding ones. These have always interfered with our blinds. Is this possible? The window is from early 1990s.

I need a replacement crank handle for an older Pella casement window. The original handle broke. I have attached photos of the original handle, spline hub, operator arms, and an identical working handle from another window. Please identify the correct replacement part.

It read pella on handle crank

Please identifiy this operator. I look like the slide on the bottom hing is broken. I have added a photo of the top hinge Thanks

issue: crank spins but doesnt open the window. Marking says 1997, and Pella. Note that there are two identical windows and the pictures are from the right side window that still works. I am looking for the parts that open with the hinges on the left.

Good Afternoon, I am from Big Rapids Public Schools in Big Rapids MI. We are looking for vintage Pella Window Crank Assembly and Lock Assembly with 1 lock and 2 hooks. The pictures have been attached. Thank you.

Pella 1999 crank shaft assembly

These are the ones that are on our windows. Need recommendation for replacement.

I have a problem at the moment of closing the window almost at the end of the closing proses and set the lock position inside. To be able to close the window, we have to push window from outside and then lock the window.

I need to replace the entire hardware on this old window. It opens on the left but the hinges are on the right (looking out the window). The handles keep getting stripped. I can only find a marking on the handle cover plate it says 4 LH; and then another under one of the arms that looks like a WL. ... (cont.)

These are Pella windows from around 1995. I would need three right handles and cranks and two left handles and cranks. The arm is about 10 1/4 inches. I think they come in units so a total of five altogether. and those are old Pella windows. Pella windows replacement cranks Thank you. ... (cont.)

I need 2 sets of these

Looking to replace this hardware with similar style but in white, need a left and right. Can you help?