Viewing all customer Discussions for:

39-109B 3/8" Handle for Pella

Went to open window and the bottom hinge seemed to have broken off from the window and frame. Looking for replacement part. These are pella windows installed over 30 years ago when my kitchen was remodeled. Looks like the bottom brace bracket from frame to bottom of the window measures 10inches. Tha ... (cont.)

I need the part between the articulated arm and the gear on the crank. As is now the crank rotates non stop without opening or closing the window. The window moves freely when manually pushed in or out. The part was broken by a gust of wind while having the window in the open position, so I don't fo ... (cont.)

Hi - the house I own has casement windows by Anderson - the house was built in like 1999/2000 - I didn’t build it - I found the correct operators maybe 10 years ago but now I need more and can’t find them - it is a split arm design with the end of the arm riveted to a bracket with three ... (cont.)

Crank handle is marked "Pella". There are no other marks. The house was built in 1980. Windows are assumed to be originals.

Hi there, I’m reaching out to check whether you carry or can identify the casement operator handle and casing shown in the attached photos. Could you please let me know if you have these exact parts available, or if there is a compatible replacement you would recommend? If you need any additio ... (cont.)

the single swing arm in the first photo, the crank is present. The crank arm is present. It's the swing arm or the single straight arm that we're trying to find

Hi Swisco, I am looking for white Folding Cranks and Lock Lever replacements for my Pella windows.

I am in need of replacement parts for two Pella Casement windows circa 1980's. The windows are 27" X 51"and have removable storms. They are part of a bay window with one opening to the right and one opening to the left. Any help in finding propper replacement pieces will be greatly appreciated.Tha ... (cont.)

The arm that connects to the actual crank has busted. The extending arm is approximately 10" long and the smaller part approximately 5-6". It appears the part connected to the actual crank mechanism broke off. THIS IS TIME SENSITIVE AS THE PRIOR TENANT DID NOT ALERT US AND THE NEW MOVE IN HAS OCC ... (cont.)

I would like to replace operator that opens left from outside and to the right when viewed from inside.

Looking for a replacement item

Hello, I have 39-40 year old Pella casement windows. Two of them dont want to close once opened. They dont open great but they do operate that all until you go to get the last crank or two to get it to the lock and it dosent want to come all the way back into the lock.

House built in 1983. Pella old-style casement windows.

Not sure of the window brand. The shaft is 7/8 inches long. 3/8 inch splines. Haven't seen a handle that fits the shaft with 3 splines.

Please let me know what handles I need for this window crank. The only number I find on it is 708 wc.

Not sure if you have one of these thanks

In the pic the crank assembly is broken so at the critical moment where the lip on the window side is supposed to get grabbed by the 'claw' on the sash side misses so the window no longer closes. i need to find a suitable replacement.

Hello! 1992 Pella crank out window mechanism is broken ? - do you have a good replacement? Thanks for your help! Kathy

Hello, I'm hoping to identify replacement operators for these casement windows. The current operators have broken pieces or do not catch when cranking to close so the window stays open about an inch. The three sizes of the windows are: 23" x 63" 22.5" x 44.5" 26.5" x 70.5" Also some of the windows s ... (cont.)

These are probably 25 years old Pella windows. The serial number is PELLA-1299-DCWCMFX1Z1-053A076APRI-521S-NFRC The gears don't turn, the hook doesn't latch on 3. Two others won't open. We opened one and couldn't get it closed. A repair man had to shut it. We just bought this place. ACE tried, said ... (cont.)