Viewing all customer Discussions for:

39-109B 3/8" Handle for Pella

LOOKING FOR A PELLA WINDOW OPERATOR WC/CC FOR AN 11 1/4 X 15 1/4 WINDOW...SEE PHOTOS ATTACHED.

The old crank doesn't seem to have groves on the inside anymore which makes closing our windows impossible. Can't seem to find the proper replacements. Can you help? There is a number on the crank x-429.

The gear appears to have broken so it no longer holds the actuator. Except for removing the wooden trim it was simple to remove. Especially with the actuator arm off. Four screws hold the crank mechanism in place. No markings and no clue as to the window manufacturer.

I would lke to purchase two (2) brass colored handles with 3/8" gear bores. These are replacements for Pella casement windows approximately 30 years oldPlease advise me how to pay for these items. The marking on the bore side appears to be X428.Thank you.Allyn

I'm looking for all the operating parts for a pella casement window. I need top and bottom pivot slides, the locking armature, top arm, plastic slides, all parts. I have two windows that have been screwed shut and all parts removed due to rust and age and the owner wants to rebuild them so they op ... (cont.)

These windows are probably 40 years old or older. They are wooden and have been unable to find any markings that indicate the brand. I would appreciate any help that you could give me.

I'm looking to fix or replace the window handles for my many windows that crank open sideways.

Part shown broke, needs replacment. can I buy new mechanism? Windows are on house built around 1990

I was informed by our local Pella dealer that you can provide replacement window opening handles. The Pella handle on the inside has a number embossed in it that says X429 I need to order several of them if you have them available

We remodeled our kitchen, but the windows are original. A downdraft behind our stove hits the current style crank. While I know I can get the little T-shaped replacement cranks parentheses I have them on other windows in the house that have blinds) I am interested in getting the ones that fold down ... (cont.)

Good morning!I have Pella Windows from 1993 when the house was built. There are several handles that do not work(mechanism broken) and latches that do not lock the window properly.Below is a picture of some of the windows. Do you have the part?If you need any measurements let me know or if there is ... (cont.)

The gears are not operating correctly and the window will not open without being pushed by hand

Hi, looking for replacement parts for my Pella casement window. Size 33 by 33 inches. The part I need would be the sliding mechanism on the right side. Window tilts down towards the left right side and sticks. So I'm not sure if it's the top or bottom slide although if you push the left side upwards ... (cont.)

Hi, I'm trying to get a replacement part for my mother-in-laws window that won't open?the crank handle is striped and it needs to be replaced. Is there a part you think might fit?

Looking for universal crank and case replacement. Prefer a folded crank or butterfly/T crank. Current ones are Pella brand. The holder includes RH on the inside. The only thing I can make out on the crank shows X 29.

Hi folks I need your help with a part for a Pella casement window. I need the little plastic part that holds the operator arm to the track on the sash. Also looks like I'm gonna to need the top hinge arm too. It opens on the right when your inside.

Looking for replacement parts on this Pella casement window. Having difficulty finding serial numbers. I will relay further information including measurements of parts soon. Wanted to submit this and see if we could get the ball rolling.ThanksDave

I need help to find this operator crank

I need 8 of these old Pella cranks for my casement windows. These are not the fold up ones.Please send me a price.I appreciate your help.ThanksJim

Hi there! Do you have a recommendation for this window? We got it at a rebuilding center and it is a great wood window but was missing the handle cranks. Do you have any idea what handles might fit this window? Thanks!