Viewing all customer Discussions for:

81-148 Roller Assembly, 1-1/8" Steel Ball Bearing, Adjustable

I have a oller that ws made by Del Mar Eng, Long Beach, CA. It is all metal and I can't seem to find a matching roller. Can you identify this?

nylon Rollers badly degraded and door hopping off track. Currently measure 1.25" suspect they may have once been 1.5". Seems similar to International 81-162 but dimple width appears to be just under 13/16 not 7/8

Thought I had the right roller from Home Depot but didn't see the original roller has a notch cut out of the front on top. Otherwise this part looks exactly correct. Maybe you can cross reference. Lastly the sticker is from the screen glass door giving a model number. Can you match the old roller in ... (cont.)

Wheel is approximately 1/4

Dimensions: 3/4" wide at the widest point 1 3/16" tall body is 2 1/4" long without the "T" shaped tail body is a total of 3" with the "T" shaped tail

Hi can you help me choose correct roller for my door. Thank you

Sliding door wheel

2-1/4" L x 1-1/4" H x 3/4" w Metal wheel - single Length does NOT include tab shown in photo

Took door off cause opening it was difficult. Took rollers off and cleaned and lubricated. Del mar engineering Long beach Cal. Pat. 3,670,357 I can't find a door manufacturer so all I have is pat # on rollers. Can you find a roller for me?

I need replacement stain less wheel

I need 60 pcs

need help . no identifying markings/NUMBERS/NAMES. 1" 1/2 O.D. WHEEL. 3/4 WIDTH AT WHEEL, 2 1/4 LONG, 1 INCH 3/16

I am looking for a replacement roller for my roller shown in the picture. Dimensions are shown on my picture. Thank you.

I need to replace the rollers on my sliding glass patio door. Pictures are attached There 2 rollers (front and back). I did see any numbers on them

I need a wheel replacement for this sliding door. No other markings besides the ones in the handle - see pics.

I would like you to match these please I need 2 new roles parts for an older sliding glass dual pane aluminum slider door. Is there any specific dimensions you need before I put door back in and wait for parts.

Help. Can you find this part? It is from a Herculite sliding glass door. Thank you. Joan

Need different roller

No markings or written info. Plastic wheel, approx 1-3/8" diameter. Size is 1-1/2" tall x 2-1/8" long (just the fixed portion, not including the sliding adjustment inner part that would make it variably longer). Pressure fits into aluminum sliding door (no brand found on the door, either.) Circa mid ... (cont.)

I need 1 or 2 rollers for a sliding exterior door made by American Tempering Inc. Ansi z97-1-1972 187u. The part was made by del Mar Engineering patent 3670557 The wheel diameter is 1 1/4 "