Viewing all customer Discussions for:

15-182 Balance Bushing

Trying to replace coin spring but not sure which type. Measures half inch thick. House was built in year 2001. Thanks.

Good morning. I build house on 2001 , coil spring broken and not able to stand the window falling immediately. Please see the pictures and let me know what all parts I have to buy for fixing this. Thank you, Pratap

We live in a Maronda home that has "MI" (???) windows in it. We need to replace one window sash that lost its seal (turned white inside). But much more urgently, I need to purchase a bunch of the little plastic catches that are screwed onto the upper corners of the lower sashes, which help hold onto ... (cont.)

Hello! I have a 23 year old house with a window that has a coil balance on either side. Both of the springs have broken, leaving a short section up by the support. The window is obviously now very heavy and won't stay up, and has become a safety concern because it is the bedroom window of our spe ... (cont.)

Hi, Part of the plastic in this window shoe has broken (best seen in image 4). Can you help me figure out what replacement to order? Thanks!

I need 2 replacement window coil balances for an Anderson window installed in 1987 or 1988. The sash weighs 8 pounds. The only marking I could see is CO on the round metal pieces. The round metal pieces measure 1/2 inch in width. I don't need the 2 plastic pieces with the 2 holes with 2 screws. They ... (cont.)

I am not sure what windows I have - but they may be old Anderson windows, per the lady at Marvin Windows.I have a pair of Series 380: H-R25-47x73 easy tip out double hung windows, one on each side of a 5' fixed window.The upper sash on one does not stay in place and will slide open now and then.I a ... (cont.)

I have double hinge window made from American craftman (I guess) 35.75 in. x 53.25 in. the constant force balance is damaged. there are two coil on top, with two screws. dont see screw for the U lock part. if you can let me know what the part # to get. thank you! wendy

Width. 3/4"Length from top part to bottom of the leg. 1 5/8"* Bushing width. 5/8"height 1/2""I would appreciate anu help you can give me with these parts.Thank you, Gabe

No manufacturer's info found.

replacrment for 832 springs and holders for certainteed windows

Can you please ID track shoe and spring. Sash weight is about 20 pounds. Thanks

Both of the coils broke on my window. I have attached photos. The coil photo shows a 9 or a 6 ???. The size is 18" x 29". It weighs approx 12 lbs. I need replacement coils for both sides.It looks like it would be possible to put 2 coils on each side but there was only 1 on each side. Please tel ... (cont.)

We are looking for a replacement part for the pictures attached. Please email us. Thank you

Hello! I have a lower sash that will not stay open and after online research, found that my coil balance / spring coil is broken on both sides. The top sash functions as it should. The coil says 832 on it. I included photos of the parts I pulled from one side of the window frame?. Can you guide me ... (cont.)

Could you please help identify these window parts and hopefully you have replacement parts. Thanks

Can I get a price and delivery on a replacement coil spring pack.

The coil spring balance on the right side of the vinyl tilt-in bottom window is broken. Can the coil spring be replaced? Do I have to replace the bottom pivot shoe and/or the upper spring holder? Not sure how to remove the pivot shoe - might need to remove the bottom track cover 1st? Any help is ... (cont.)

i need a coil its 1/2 wide and it has a number 8 stamped on it

I need to replace broken springs for MI window. The window was replaced around 2008.