Viewing all customer Discussions for:

15-182 Balance Bushing

Hi, I need few Window Coil Balance Replace parts (Dual Coil) and don't know the weight of the window. this is a standard window (I believe 30"x36") Image is attached here. Just wondering if you could help me pick the right part. Thanks, Mark

Hi, I found I ordered wrong parts: I ordered 2 x 10 lb Series 140 Quick-Tilt, Single. Product Code: S140-10 Please take a look at the attached photo and let me know the correct part number. Thanks, Yi

I have a bathroom window, 25 in wide by 17 in high that the coils on each side have snapped leaving part of the coil on the top part (not sure what it's called) and the other half still connected to the boot. Only thing I see stamped on it is either a 6 or a 9? The coil looks like the one pictured ... (cont.)

Need to repair broken sash spring. I included a picture. The windows have no markings or brand identification. The window is 29.5" x 36". Double pane. I came it with 24 lb. That would be a 12 lb sash spring for each side. I assume we would need to purchase two so they would be balance as I do not ... (cont.)

coil balance for 29" x 33 window. no markings on it. Coil balance measures 1 1/4 " wide by 3' length. I am looking for replacement parts for 2 windows. thanks for any help you can give.

Need help with balance, thank you.

Hello Customer support, on your website I saw a similar coil to mine shown in the photo. It looks like the 190 series. We have 2 coils as shown in the pic, one is stamped 740 the other 840. Your site has the 740 but not the 840. How can we find the 840? Is there a special tool to replace these coils ... (cont.)

I need two of these window rollers to replace the two broken ones in my window.

Hello, Attached is a front and back photo of the window coils that I need. I am in need of 16 of them (for 8 windows). They are all the same size and type of windows. Please let me know what I need so that I can order them asap. Thank you Rikki

Weight of the window sash: ~ 22 lb Height of the window sash ~ 89cm My window uses Dual Coil balance parts as shown in the picture. Each sash uses 2 parts (one on the right side and one on the left) coil diameter (when mounted) ~ 28 mm Spring thickness: ~ 0.21 mm Spring ban

Hi, I need help to select new balance slides for my 12 year old windows. The only label I have shows the windows as series 3500 / 3550 HR 30 36x64. Photos have been added and I hope you can guide me in the right direction. The measurements for the slides are 1 1/4 X 2 X 1/2 Thank you ... (cont.)

I have seen spiral, block and tackle , channel balances but this is my first experience with "coil balances". The attached pics are the parts that basically fell out if the window channel. Once identified I will order them from you guys. Thanks, Buzz

Do any of these look like your parts?

this looks like a double coil assembly. I did not remove the assembly so I don't know specifically which parts I will need. Can I buy the entire assembly? I will need two. Are they handed? If so I will need left and right.

Coil balance is 4"long 1 & 1/8" wide with depth of 5/8". Pivot bar is 3" long with screws.

having a hard time sending you picturs

milgard window roller or pivot not sure what it is called hope you can help thanks Mark

PLEASE HELP IDENTIFY THIS PART FOR WINDOWS. THANK YOU BOBBIE

Looking for attached part...the only marking I have is on the spring and its a 6. The attached part is for a larger window. I also have a smaller window that needs the same part. I'm looking for the whole assembly for both windows.

not sure which parts I need, and not sure who made the window. This is for residential windows for an apartment complex that we bought. If you can help me identify what part I need I would like to buy a couple to test, if they work I would like to buy some quantity for supply. It measutes 4" long ... (cont.)