Viewing all customer Discussions for:

15-182 Balance Bushing

I attempted to order a replacement coil balance for my window but it is a two-coil and what I ordered was a single coil. I have attached photos of the balance. I have included several pictures including one with the '9' shown on the coil. Window size is 34 1/4 x 33 5/8. Any recommendations? Ther ... (cont.)

The spring balance recently broke in a window in my house and I am not able to find the replacement locally. Can you help me out? I have attached a picture of it from the other side of the window. The home was built in 2005. Thank you.

I need to order coil balances. I know I need shoe #15-180, spring #S190-640 (2 for each shoe, I assume), clip #15-181, screw #33-072 (2 per shoe, right?). My question is, how do I know what else I need to make a complete balance? I have a sample in front of me, but it may not be complete. Do I n ... (cont.)

Please excuse my ignorance of the technical terms! The bottom plastic piece of the coil balance assembly is cracked (see bottom of picture). This is the part that the "foot" on the window would sit in, but it slips right through the crack and the window won't stay in the open position. This is an ... (cont.)

hi there, i've attached some pictures of parts i need. based on what i see your site it appears my windows may be certainteed? would these be the correct products based on the photos below? 26-352, Pivot True Pivot Bar 15-150T, Constant Force Coil Balance Triple Support 15-150D, Coil Balanc ... (cont.)

I have this part that needs replaced. it is 1 1/2 inches in length and 3/4 inch wide. Picture included. Please respond to see what will work best to replace. We cannot find a stamp or marking on the hardware itself. Thank you, Shawn

We have a window that can be open by sliding up and down on both sides of the frame. There is a coiled spring that help to carry the weight of the window. The coiled springs are broken and we would need a replacement part. We are not able to identify the window manufacturer. There does not seem to b ... (cont.)

I had a window made by MI Windows and Doors, Inc. and the coil balance was broken and could not hold the opened windows. The window is MI 8500 series (WxH 85in x 75in). How can I identify the right coil balance parts from yours and replace with the broken ones. Your help is greatly appreciated. ... (cont.)