Viewing all customer Discussions for:

39-298 Tee Type Crank Handle, Fits Andersen

Need folding or T operator handle for 1978 Anderson Primed Wood Casement. I have taken a photo. The spline has 12 teeth and it measures about 11/32 to 5/16 in diameter (outer spline dia). The windows are wood on the outside not the 400 series with vinyl.

I see that your part Product Code: 39-286 replaces these old cranks that is great. Do you also have a crank that will fit this spline that has a handle that folds down so that it does not stick out as far as the original handle (ABOUT TWO INCHES).

They need to align with ANDERSEN OPERATOR COVER Product Code: 39-154- White

Anderson crank casement window how to change to a tee crank. I purchase these two window back in fall of 2009 spring 2010. I need to covert them to the tee style in order to put up some blinds. I do not know how to remove the crank handle or see how to do it. I would like some detail instructio ... (cont.)

I bought about 25 tee type 39-298 for andersen casement windows awhile ago. My goal having rental property and people not quite taking into consideration the cost of replacement operators was to eliminate them getting broken due to the force 39-286 handle puts on the splined shaft. The tee type woul ... (cont.)

Can you find this window crank?

Looking for a whole CASEMENT OPERATOR with handle, preferably foldable. The original part has Andersen stamp but no part number.

For this window crank,39-146, do you have the wing nut style crank as opposed to crank 39-286.

--these knobs tend to unscrew spontaneously, most of my handles are now w/o these knobs are replacements avail other than the whole handle would 39-298 work as replacement for handle 39-286 I need 21 knobs,and 8 full handles, or else 21 full handles funny how all these have disap ... (cont.)

Hi guys, can you help me with this one: Numbers listed on the arm are CW-35 CW6 20" SPLIT Picture attached.

I am looking for an Anderson window crank replacement and must be same exact size otherwise crank will hit sill. The corresponding part number is 7191-8. They seem to be smaller cranks than the ones I see at stores. Thanks for you help!

We are trying to find either t-handles or folding handles to replace broken handles which are from anderson casement windows that were installed in 1973. The number on the bottom of the crank there is a number 60-C-704-62. I have tried 3/8" cranks from my local hardware store and one of the problems ... (cont.)

can you use the tee type handle with the 39-094 OPERATORS. we have rental properties with anderson windows and the tenant are hard on them. also do you sell just the knobs for handles? thanks, sharon

I have three 1986 era Hurd casement windows with traditional gold tone Hurd cranks for which I have ordered new window treatments (dual roller shades) I would like to replace the existing crank handles with T-handles so the roller shades will not interfere. The spline bore looks to be 3/8" inn ... (cont.)

I am looking to get a crank extension for an Andersen casement window. I only need a 7/8" extension. The one I see on your site says it's 5/16" and I'm pretty sure the Andersen cranks are 3/8". Will this one work, or do you have any short 3/8" crank extensions? Thank you.

Need 2 full hardware setups. This was on the main windows that don't open. Couldn't find any other manufacturing markings on the windows that open. Anderson windows Cig-3 3-91 High performance Igcc cba igmao or c House was built before 1992. Thanks!!!

Andersen casement operatops right and left with plastic covers and t handles.....Casement number 1361316

How does the folding crank handle attach to the casement operator which has a serated(?) end? Would this type handle allow you to overcome an extra wide sill and be able to open a casement window? Do you know if Andersen makes extensions?

I need to replace Anderson split arm window operator 1361316 and 1361318. Is this your 39-147? I also need the crank handles. Is there a style that folds back rather than sticking straight out of the window? How much would it be for both right and left operators and handles?

Hello, I have Anderson windows with 1361316 operators. Will these cranks (39-301) work? If not, what would you recommened as the smallest crank possible? We installed 2 inch blinds and the current cranks get caught up in blinds. Thanks, Tony