Viewing all customer Discussions for:

24-939 Andersen Sash Balance, 927, 931, 937, 939

I have 2 1984 Anderson windows that need to have balances replaced. The first has each window section of 32 1/4 w by 22 h. In the photo of the balance it looks like a number of E7 9#27. The second window is a little wider at 36 1/4 w by 22 h. Before I take apart the second window, would this one tak ... (cont.)

Also need 2 of these Anderson double hung , head jamb mounted window balances

Need to replace 12 Andersen Sash Balancers. Window are fine but some cords broke. 2 per window. I have included a picture of the balance I removed. Let me know if you have a perfect match. Thanks.

I need the right and left balances for Andersen DH Here is all the info from the casing box 1600-17 at top E37 9#27 1-B6

Hello. This is the left side window mechanism. What is the correct replacement? I will also need the right side replaced. Is it the same part number? If not, please specify. In case you can?t read the photo, the number is.BE5 9#27 5 84Thanks

The balances for left and right have identical stamps on them. One stamp is 11600-17. The others are E91 9#27 5-84. I'm betting 927 is the number. I have four windows on the 2nd floor on the front of the house. Three of them need both balances replaced. Is it safe to assume that all of the bala ... (cont.)

I need two replacement balances which look like the ones in the photos above. I also see 11600-2 and that the balance is Andersen made in Bayport, Minnesota. I also see E8 9#27 3 81 on the lower right. Which balance do you think I need? Thanks very much for any help!

I need right and left balance replaced numbers that I can make out look like E64 9#27 ( B68 or 868 ) also 11600-3 and 11600-2 on the other side. Pat 3146488 3.335.455

My andersen sash balances do not have a stamped number next to the AW code. Can you advise what part numbers would replace 887 437 7 88? And, my other sash balance needed only has this number on it near the AW triangle: 1600217. On its lip is this number: 2 6 91. thanks.

Sorry I didn't capture the entire unit, but assumed the numbers are the most important thing. When I search for Andersen 927, it brings up several units on your site. I just need to make sure I'm selecting the proper unit. Thanks!

I extracted the sash balance. The part number is E48 9#27 9 86. Can you advise what replacement part I need. I need two of them.

I have (2) Andersen windows (about 35 years old) that need new sash balances. I tried to get a good picture but couldn't, I was barely able to read them with a magnifying glass and flashlight. Window #1- Balance marked - 11600-17 E39 9127 5-86 Glass measures - 32 3/8 W x 23 7/8 H ... (cont.)

Hello, I have a C30 6#30. Which support should I purchase? Is there a cross reference that I can access? Thanks, John

Having a hard time matching these numbers up.

Hi, Can you recommend a replacement sash balance based on the attached photo? Thanks, Eben

Hi, would like to replace Andersen balancers R10 927 11-87. Thanks Bill

I am looking for a replacement sash balance for my Andersen Window. I attached the pictures of both the balance and window. The Balance has three multiple numbers on it: On one side, it 11600-17 and 931 R78 2\02, on the other side it has 11600-A-3. The window is a 4x2 (both lower and upper panel ... (cont.)

Need to identify what replacement parts is?

Can you recommend a replacement part for this balancer?

I need to replace two sash balances. these are the two numbers listed on them, 11600-17E59 9#27 8 83. What part number of your product would I need. Thank you,Fred