Viewing all customer Discussions for:

23-115 Spring Loaded Top Pivot

Hello I need the slider on the bottom right. Thank You

I need two of these replacement parts

Hello, I'm looking for the missing parts for this door. I think it might just be the missing snugger? Or assembly that holds the pin in the track. There appears to be a spring already in the track, and one half of the door is still attached (fixed in place by a screw it appears). Any help would be a ... (cont.)

1/2" track, 1/4" srimg loaded pin. Top of cap 7/16", lower part of cap 5/8". Please help. I need 2

Please help me with getting correct replacement tracks and parts. Opening is 60 inches and doors are each 29 1/2.

This is the mechanism on the part of the door that slides in a track. The door keeps coming out of the plastic roller. Not sure but perhaps the whole mechanism needs to be replaced?

Customer Service, Please offer suggestions! I need to replace my aging Stanley "17-4405" because the plunger spring is no longer “springy” enough to keep the door elevated. Please advise what you recommend to replace or repair the Stanley 17-4405. Please see these pictures. ... (cont.)

This spring doesn't have enough spring to keep it in place. Thank you so much for your help.

I'm renting a property & one of the mirrored bifold wardrobe doors will not move. My landlord says nothing can be done. I've had a look & the attached photos show damaged parts. Do you have anywhere in the UK who sell these parts & can you advise of the part names & numbers please. M ... (cont.)

This part was for bifold doors installed in 1991I believe the diameter is 1/2".

The plastic piece that the pin fits into broke. The doors are 30 years old but in terrific shape. I have tried the box and hardware stores as well as Amazon for the piece but the are too narrow for the rail. I was able to repalce the wheel with no problem. I would need two so I can replace the other ... (cont.)

I have bifold mirrored doors manufactured in 1999 by Contractors Wardrobe (CW). The pivot bracket on one side jumps in the track, and the door will not open or close properly. The bottom track appears to have spread. The hardware appears very similar to Stanley hardware - perhaps manufactured by ... (cont.)

Your help center assisted me in ordering the proper corner block that I needed, which was 23-407. But now it looks like I need the glider anchor screw for whatever it's called. I'm attaching photos and hoping you can help me find the replacement part as this is now old and worn.

I have a bifold mirrored door from indenpendent mirror co . The door is not functioning correctly and i believe I need to replace these parts but I cant find them . can you help

Hi, I need the top roller pivot to fit s Renin mirrored bi-fold white metal door with a 7/16" diameter hole and 7/8" O.D.THE ROLLER IS THE THIN ONE. Nothing the usual replacement size.Thank you!

Hi I am looking for the bottom right side (looking at mirror side) pivot pin for this Renin 36 in X 80 in mirror bifold door. They were removed for a mold remediation and contractor lost the bottom right pivot pin. I would like to purchase the bottom right side pin and roller that goes in floor ... (cont.)

Do you carry this parts? This go on a 36" bifold mirror closet door.

I have older mirror bifold glass closet doors doors The opening is out of square, unfortunately. We bought a package of roller replacement parts that fit a 3'8 hole I am seeking a replacement roller pin that fits a 1/2" hole. (not the common 3/8") If the pins are longer that would also help. D ... (cont.)

i need the part that goes into the black part that into the gray part that has a part that has a thing that fits inside the black thing

The hard plastic roller wheel broke on my bifold mirror closet door. I only need a set of replacement roller discs not the entire assembly. Thanks for providing this excellent service.