Viewing all customer Discussions for:

15-186 Coil Balance Clip

I've 10 replacement vinyl windows I will list the sizes below they have the dual coil balance system their double pane insulated glass I will need the shoes for all of them as those of all broke because they were plastic I attached one that my neighbor got he doesn't remember the part number I want ... (cont.)

I have no names and the upper part on the broke side is missing

Good afternoon, Can you help me with obtaining the correct replacement parts. Im not sure which ones I need to replace these balances. I have one broken in one window but probably need both sides I am guessing. Can you please tell me the correct parts that I will need to order to replace this. ... (cont.)

My coil sits in side a small plastic square that has a hole in the center to screw in the channel of the sash. Do you anything like this

window wont stay up. entire balance shoe and spring missing from left side of window. dims are approx. 1.25" wide and 9/16" thick.

See pic for part. No markings seen on part.

I have a bathroom window, 25 in wide by 17 in high that the coils on each side have snapped leaving part of the coil on the top part (not sure what it's called) and the other half still connected to the boot. Only thing I see stamped on it is either a 6 or a 9? The coil looks like the one pictured ... (cont.)

coil balance for 29" x 33 window. no markings on it. Coil balance measures 1 1/4 " wide by 3' length. I am looking for replacement parts for 2 windows. thanks for any help you can give.

Weight of the window sash: ~ 22 lb Height of the window sash ~ 89cm My window uses Dual Coil balance parts as shown in the picture. Each sash uses 2 parts (one on the right side and one on the left) coil diameter (when mounted) ~ 28 mm Spring thickness: ~ 0.21 mm Spring ban

Hi, I need help to select new balance slides for my 12 year old windows. The only label I have shows the windows as series 3500 / 3550 HR 30 36x64. Photos have been added and I hope you can guide me in the right direction. The measurements for the slides are 1 1/4 X 2 X 1/2 Thank you ... (cont.)

I have seen spiral, block and tackle , channel balances but this is my first experience with "coil balances". The attached pics are the parts that basically fell out if the window channel. Once identified I will order them from you guys. Thanks, Buzz

Do any of these look like your parts?

I believe this is a Betterbuilt window. The window won't stay up so I'm sure it needs balances. I have never seen this type of system before. It is a tilt-out but I don't see the balance.

having a hard time sending you picturs

milgard window roller or pivot not sure what it is called hope you can help thanks Mark

Hello - I am looking for the swing/lock brackets that hold/support the bottom window of a 165 series non-thermal single hung aluminum window (picture attached). The windows were installed in a new home in 2005. Please let me know if further information is needed. Thanks!

The spring balance recently broke in a window in my house and I am not able to find the replacement locally. Can you help me out? I have attached a picture of it from the other side of the window. The home was built in 2005. Thank you.

I need to order coil balances. I know I need shoe #15-180, spring #S190-640 (2 for each shoe, I assume), clip #15-181, screw #33-072 (2 per shoe, right?). My question is, how do I know what else I need to make a complete balance? I have a sample in front of me, but it may not be complete. Do I n ... (cont.)

I have identified the weight of balance I need but don't know how to tell which model I need. Is there a simple way to find out without tearing the window apart? i have attached a couple of pictures. Thanks!

I have this part that needs replaced. it is 1 1/2 inches in length and 3/4 inch wide. Picture included. Please respond to see what will work best to replace. We cannot find a stamp or marking on the hardware itself. Thank you, Shawn