Viewing all customer Discussions for:

39-323 Truth Hardware Contour Cover

I

Hi we have 2 window crank covers broken, as per picture. I tried to measure and it seems about 5 1/2 x 1 1/2 but maybe a little smaller. I also have a US address if you don't ship to Canada.

We bought a new house and in a bedroom are two new windows. They are Pozzi wood casement windows that are horizontal -- they are long and thin and high on the wall. Both are missing lock levers and it would be nice if the crank mechanism had covers. The photos are in the correct orientation. Can ... (cont.)

Hi Can you help me find this cover Thanks

Beige, putty color? For Curadco (Jeld Wen) casement window. Need new crank handle and crank cover.

Caradco crank handle and cover plate as pictured. It is a bi-fold crank window and both of these parts are missing from the other side

I have a crack in my Casement operator cover. I can't figure out how to get the handle off. Do you have this cover? How do I get to it?

Looking for a crank handle for Marvin casement window. The window was new about 15 yrs ago. Bronze I think. Thank you!

We just purchased a house that has casement windows and we are missing two cranks and have one missing cover and three cracked covers. The cranks say "Truth" on them. I see replacement covers on your site, however they don't appears to be the same shape and also have a slit in the cover. I attach ... (cont.)

I have a general question; will the 39-107FK replace the 39-323 cover? Thank you in advance for your time Randy

Good morning, I am looking for replacement parts for my Marvin window crank covers. I uploaded images of the broken crank cover (remodeling mishap). The covers are 5.25" long. The flat area near where the crank protrudes measures 1.5 inches. There is no model number on the cover, and I can ... (cont.)

I need one crank cover in a grayish brown color. It is approximately. 5 " long in the back. 4.25 " in the front 4.25 " in width 1 " in height The inside has a marking Truth Hardware

I need to replace the cover for a casement window crank. I have attached a photo where you can see that it has cracked at the top. However, I can't figure out how to install it, as the crank does not have the little set screw that holds in most of the other cranks, allowing it to be easily removed. ... (cont.)

Hello I just purchased a home with 15 casement windows which are opened & closed daily. The hole in the existing handle appears to be 3/8 inch. As you can see, the small area makes this a long process & usually leaves my blood behind. Also, my fingers aren't strong enough to open the window entirel ... (cont.)

I need 1 hardware operator cover for a Caradco casement window. It measures 5 and 1/4 inches.

We have several windows that need replacement crank covers and it seems that JELD-WEN windows do not support this part any longer. Could you provide some help on where to locate these?

I'm painting Shelter window trim from oak to white and want to replace the window hardware from grey to white. Do you have any options now that Shelter is no longer in business and I haven't been able to find parts anywhere. Sizes and hardware shown in images. Truth Hardware logo is on the inside o ... (cont.)

We need to replace (1) white cranks with 5/16 bore size, (2) case for the crank since ours is cracked (around 5.25 inches wide, 1.1 inches deep, 1.5 inches height) and (3) window opening gear assembly (see explanation below). On one of the windows, the window opening gear assembly is broken (se ... (cont.)

Photo 1 ...left side picture of the same part needed on the right side window (window bracket and clip) Photo 2 ....missing bracket and clip from right side window Photo 3 ....I have one cover, but need second cover for right side and 2 handles ( one for each side)

I have a semco casement window with a broken crank. Upon further examination I noticed that the hardware said Truth Entry Guard 30744 on one of the pieces. This window is the left window when looking from the outside. It seems to me that the replacement part may be EntryGard Dual Arm Operator 39-031 ... (cont.)