Viewing all customer Discussions for:

32-089 Drawer Track Back Plate, Pair

Need to identify part and order them for 3 cabinets. This is side mount.

As seen in pictures maily need the end piece that holds the rails in olace if possible or if part of a kit. Probably could use half a dozen if could get. Please advise part number and or how to order. Thank you very much

I am looking for a bathroom vanity brackets for a draw that broke. Ferrari G026 (3-3) I do see that some people had a similar issue. Maybe you could help me out.

Hello our drawer slide bracket had cracked. We are sending pictures so you can help us find a set that we can replace the brackets. On the bracket, it is inscribed Ferrari part GO23 and on the other bracket Ferrari GO24. Fyi our slider is 17 1/2 Depth of our vanity that the drawer goes is 21 in ... (cont.)

These just plug into two holes in the back of the cabinet with out screws (although there is one screw slot) Thanks, Dan Testa

We have merillat cabinets and recently one of the drawers is feeling and sounding like the roller glides are starting to wear out. I'll include some pics here. We'd like to know if we can order these.

Looks like it's part "unigrass6600 That's the only markings on hardware. I'm only looking for 1 set. Thank you Steve

The plastic is 4" long and the opening for the bar to slide into is 7/8" of an inch wide Thank You for any assistance

Hello, I hope all is well on your end. I currently have Unigrass 6600 drawer slides, I would like to replace them with a good quality soft close slide. What slides would you recommend that I purchase? The drawer boxes measure 21 3/4". Additionally, I have a lazy susan with similar builders grade har ... (cont.)

Socket to hold rear slides has vertical, not horizontal pegs that go into cabinet rear wall Cabinet depth is 22. Track measures 22 1/2 and attaches to inside front

I have a 21.75" drawer with Unigrass 6600 slides and I need to replace the slides and the accompanying cabinet rails. The cabinet depth is 23.5". Please recommend what replacements I need. The existing cabinets have a plastic rear Mount extension bracket. You can see the rollers on the existing ... (cont.)

I need a pair of slides 22 1/2 long by 3/8 wide with matching end sockets.

Hello, I need drawer rails, please. The numbers are R20207 LDWR and 20207 RDWR. The rails are 21 5/8" long. There are two photographs showing the rail. The rails inside the cabinet are ok. Just the rails on the drawer are bent. Thank you, Lawrence

Hi, I am looking for a replacement for a Unigrass 6600 22 inch drawer slider with an "L" ending for an in-cabinet drawer. The drawer is a shallow tray for pots and pans that fits in a double wide cabinet below a cooktop.

Can you I'd this from 2000 Winnebago drawer under frig thank you

For kitchen cabinet drawer. Need the opposite side roller assembly. Right side when face drawer front.

I'm looking for Ferrari G023 drawer sockets, I think the 32-018 one is the fit, but it is showing discontinued.

I am looking for a match for Kitchen Kompact Product ID: 982279 I believe. Can't find a schematic anywhere for it. Max length of bracket from backplate - 2 1/4", and track opening needs to be 1" Your 32-012 might work?

currently have only the drawer insert in attached photo, want to add more using the 32-062 glide

Looking for the hardware that match these items. The slide on the drawer itself measures just over 22 3/8 inches. The slides that are attached to cabinets measure just under 23 inches. Also need the same hardware with measurements of 19 1/2 inches on the drawer and just over 20 inches on the cabine ... (cont.)