Viewing all customer Discussions for:

23-200 Adjustable Floor Guide

I have tow mirrored closet doors which came with the pictured wheels top and bottom. I need a 60 inch top and bottom rail and don't know which ones to get. Thank you for any help. Looking to get asap. Thanks

I have an existing closet door requiring new rollers. It looks like a 3/4-inch Dia roller because 7/8-inch roller is too large for the track. It approx. 1/4 inch offset. See picture below. The diameter of the will is approx. 3/4 or 5-6/8 dia. a 78 inch dia which is too big Thx

When the doors are mounted on the track what is the clearance distance between the doors ? I will be using 3/4 inch thick doors. From the video it appears to be 1/4 inch. Thanks Ron

The attached is on the rear door of my closet and keeps separating from what ever screw I put in. Would your 23-010 be the correct replacement for the current bracket? Also would your 23-200 be the correct door guide for the 1 1/2 " doors. Thank you

Hello, We had new carpet and LVP flooring installed last week and the installer did not replace the floor guides for any of my sliding closet doors. I need to install them on new carpet and also a luxury vinyl plank floor closet in one bathroom. Please recommend which of your products to use and ... (cont.)

We currently have sliding mirror doors in our master bathroom and I wanted to convert it from rolling on the floor to having rollers on a track overhead. I was wondering if i used 23-501 for the overhead track, 23-200 for the floor guide and 23-027 forth rollers to replace this And I assume I just r ... (cont.)

The plastic tab in the sliding door guide broke off. Can you identify the replacement part for this guide? Thank you

L - 4 3/4" W - 1 1/2"

Adjustable floor guide 23-200. What is the distance of the mounting holes? Center to center.

hi there, I need a replacement for teh attached pictured closet door guide. It has a "Sterling" logo, but no other identifiers. House was built in '81, this is probably original. I need 4-5 of these?

Door guide for sliding closet doors. I think the front (plastic) guide is snapped off and needs to be replaced. Not sure if I need 23-210, or 23-202, or something else. Please advise. Would like to place order ASAP. Thank you, Dorman

Where do these get installed? Are the closet doors open (doubled) with one guide going on the inside and one on the outside? Or does one go in between the two doors (as a spacer)? I am sooooo confused. Thanks!!

Are thes track good for 1 in thick doors,wood. width 118 inches. Three panels. 2 in back,one in front . Existing track is ceiling only.very poor function. Need top and bottom track and hardwarw sincerely, Norma

Does anyone know if I can get this product with white guides instead of brown? The brown doesn't look good against the door.

I have 1&1/4 inch thick doors. Will the 23-209 or b guides work for me?

Hello, I am a DIY and building closet doors for six closets. I am planning to use 3/4 inch thick wood for my doors. Your tracks on your site are designed for 1&5/8 inch doors. I was wondering what tracks and other hardware you would recommend for 3/4 inch doors.

We are planning to install closest doors. These will be four wide on two tracks and about 7-1/2 feet tall. We want a track on the bottom, not just door guides as we will be walking across them. We don't have the doors yet but the space is ready. We need to get the hardware so that we can ge ... (cont.)

Do you have a floor guide that is in internal groove at the bottom of a sliding closet door? Thank you Roger.

Hello, I've got older Acorn tilt out windows. They slide up and down. The spring on the side is shot and I need parts. The silver part of the spring is 29" long. I may need the connector to the window as well. Do you have those parts or could you point me in a direction to find them? Thanks! ... (cont.)

Looking for 2 pairs of the ACME 121 adjustable floor mounted bottom guides.