Viewing all customer Discussions for:

39-346 Jalousie Operator Replacement Kit

I need a new crank for my JAL-O-VENT window that was originally produced by IECO industries DesPlaines IL.

Need a replacement window crack

I am trying to find this crank addy by Stanley but every one arcs the other way. Does it matter? It is a R/H crank

Hello looking for the lever part in the photos. It is marked with Louv Air under it. Also the window frames also have Louv Air stamped on them

This jalousie crank is/was actuated with a pull chain. There are three gear cogs, one is attached to the pawl arm that in turn raises:lowers the rail holding the glass louvers. Broken tooth, so no workie. Not sure what my repair part options are going to be?(Edit: "Pawl arm" not panel arm.) ... (cont.)

Hi I'm looking for a replacement crank for my French window.

I have tried replacing this with "reverisable" cranks to no avail. This is for a double jalousie window with the cranks in the middle. It is on the left side of the right side window and there is a crank next to it (1"apart) for the left window.

I need to replace the window crank. The handle slips, but the crank works.

Hi - I am redoing an old house and have purchased 22 of the 39-346 replacement handles. I am missing some of the smaller e clips and double grove pins (picture attached) that go with the 39-346 set. I would like 4 of each if that is possible? In addition I am repairing old larger windows that use a ... (cont.)

I am look for similar bottom jalousie window frame seal. What I have is broken and brittle.I have attached a picture and will need 27'Thanks, Mark

Hello - I'm trying replace the crank operator for our garden window in our kitchen. The operator handle was missing (also assuming it is stripped) when we bought the house. The mechanism has 2 holes 3 7/8" apart to attach to the window frame. The arm extends about 9". Can you recommend a good replac ... (cont.)

I am looking for a handle and screw. Thanks

jealousies window crack with a small T handle only

Do you carry this type of opener. It's probably very old!Thanks,John

Hi there .... We're trying to find some replacement operators for our jalouise windows... The house is in the Caribbean so trying to find the right part.....headed there in October so no rush.. Do any of your operators work for this? Sincere thanks, Tom

Crank and screen

The handle broke away from the frame. It is really old and wor, so I cannot open and close the window.

Is there a universal operator that will work if I cannot find the original make/model? I believe the windows were originally installed in a hospital that was demolished/renovated in Iowa in the early 1970s. They were then installed in our cottage in northern Canada.

Trying to find a part so I can operate the Jalousie window. The little handle just spins. When I took it apart, I couldn't get the arm to come out of the door didn't wanna force it because I was afraid I was gonna break it. Please let me know what to do.I've taken the screws out of the handle, and I ... (cont.)

Good day, my house built 1957 has aluminum awning Jalucion ,crank windows, right side crank operator Need 4 window operators Need 10 crank handles Need 6 hook locksNeed 6 hook locks studs baseWindow are stamped Trade Mark Auto lokPlease let me which part are the replacement on your website?Th ... (cont.)