Viewing all customer Discussions for:

23-301 Bi-fold Door Bottom Pivot Bracket

Most replacement parts do not have the pivot caps. Therefore we can't use the standard replacement pivots. The size of the cap is 1 1/2 x 1 1/8. We will need eight top and four bottom pivots.

This is a Stanley monarch full mirrored bifold door. I'm looking for the top and bottom are the same plastic roller that fits inside the track photograph is of the top. It's in fairly good shape. The bottom one has disintegrated completely away. The plastic part it's about 3/4 of an inch wide by 1/4 ... (cont.)

I was thinking maybe a metal plate across the bottom of the door, with a screw to replace the pin the first picture you can see where the door on the right has the pin in place as needed. The one on the left is the one that is missing the bottom pin also a close up of the pin

It is 30 inch bifold mirrored door. I need track both for top and bottom. I need the gliding roller that glides inside the track and whatever hardware that goes along.

I need a bifold door top bracket that is wider than the 7/8 in brackets commonly available. The interior of my top channel is a full 1 inch. A 7/8 in top bracket slips out of the lower flanges of the track. Thanks!

Hi, I need to find a rail/upper brackets and bottom pivot brackets that will work with 2 different set of wood, bifold doors. (Full louver) The upper pivot pin is 1/4" and roller is 3/4" or 13/16" and the bottom plastic pin is 3/8" (bottom), 5/8" (top). (Half louder) The upper pivot pin is 1/4" ... (cont.)

Hello, I am interested in replacing these broken bifold door parts. Can you please help me identify the parts that I need? Thank you, Diana

I have a Stanley Monarch folding glass mirror. I need to replace the spring loaded pivots for the bi folding door. I am trying to repair a bi folding door that is off its hinges. I am asking you this question...should I replace the corner blocks? Please advise.

i need to replace a corner bracket that pivots for a closet swing door (for about a dozen doors...) currently it is that stanley 4212 metal bracket with an insert for it that says part no. 01-5264 sorry i have no picture - it is similar to the above pictured track wheel assembly, but it has a pivot ... (cont.)

Good evening, I'm looking for replacement parts for our bi-fold doors at our home. The only P/N I can find is on the L-Bracket which reads Acme 2060. I'm struggling to find an exact replacement set for two sets of doors - seems like there are newer replacement models, but not exact and would like ... (cont.)

Bought this 24"x78" bifold mirror door at a thrift shop and it's missing all the hardware. Given the mounting locations, and the retracting pins on the bottom it looks like it may need more than a regular track and rollers from home depot. Any suggestions?

BiFold Track with Pivot Bracket, 4' Open Product Code: 23-510 Is this compatible with Jeld-Wen BiFold OEM Track

I need a replacement for the STANLEY pivot and Guide wheel

Hello here's the pictures of our door hardware that we would like to replace.

do you carry this hardware anymore ? I have closet doors that are floor to ceiling with no vertical sections in-between for mounting I currently have this hardware on a closet setup that is the same and would like to do the same to this closet

Need the parts that are in the images for an Early 70s bifold mirror door. No mfg stamped on door.

Thank you so much for your help with this. I wish I had more specific information or a part number or something else to go on. Maybe you can help. We bought this house a few months back and the mirrored doors in the bedroom had been removed to paint and replace the flooring. They are very nice d ... (cont.)

Hello, I believe I have a bi-fold closet door with Swisco hardware. It has a square/rectangular door guide cap (on top-see photo) which leads me to believe it is Swisco. Anyway, I have one door where the bottom pivot has been riding in the metal part of the bottom pivot bracket for years possibly a ... (cont.)

We have a 36" track which is 1" wide needs replaced since it is somewhat bent. We also need the following hardware replaced. Please advise on what to order. 1. Track 2. Hinges 3. Roller 4. Top mount 5. Bottom mount

re: part for my wood bifold door. Below please see photo of damaged part (in three pieces) needed for bottom door bracket in second photo. The broken plastic pieces may be upside down in the photo. Another photo shows how another door looks but it looks like it has a different bracket. This is a ... (cont.)