Viewing all customer Discussions for:

81-154 Tandem Roller Assembly, 1-1/4" Steel BB Concave

i have a Ray-Dor slider. It has tandem rollers on both ends with the adjustment screw on the end cap. There are two phillips screws above the adjustment screw. I can't tell if this is what keeps the rollers in, or if they are held another way. I can't see how they are attached.

Good morning Tom. I have a tandem ss patio roller that looks and measures the same as the 81-154, but the rollers are 1 1/2". What part # do I need?

Hoping you have a set (2) of this style slider. If not do you have the rivets that I would need to change out my rollers

Hi there, I need rollers for my two patio doors. Thanks Robert

I am looking for rollers for my patio door and I thought that I had found them in your 81-030 model. All the measurements were the same. However, I noticed that there was no groove as best shown in pictures 01 and 05. I didn't think too much about it until I went to reinstall the roller and I saw th ... (cont.)

Patio doors tandem rollers required

there are no hardware stores in my area that carry this roller. This roller has a flange on the sides that slide in to the bottom rail

My 2 sliding doors are hard to slide. I am attaching pictures. Four Seasons just sent me a set but they're not identical to old ones. Please see attached pictures. Thank you!

wheels 1 1/8 in diam 3 1/8 in long 12/16 inch width 1 1/8 inch tall the height adjustment screw on top I believe West windows makes the door.

one wheel lost its bearings and gets stuckhoping to find entire unit, if not replace seized wheel w new wheel and new rivetnote: the wheel diameter is 1 1/8"

rollers are metal, took pictures when i had door out 2 years ago.

M-1100/1125 SGD-R20. 180x83 SGD-C30. 80x83

Height 1 1/8" Width 13/16" Wheel Diameter 1 1/8" Wheel Material = Metal Made a mistake removing the 1/4' dia rivet hold the 2 wheels in place. Do you have a replacement axle that is 1/4 diameter by 7/8" in length? Or do you have pricing and availability for a new roller Cartridge? ... (cont.)

double roller about 1/4 to 5/8 thick

Need to find these wheels?

I think the 81-154 may work. The width of the 81-154 is 3/4 inch while mine measured 13/16 inch. I could be off. The diameter of the wheels are 1 1/4 inch, same as the 81-154. If they don't fit. can I return them?

I need rollers and a rail cap for this door. And i need asap to finish up a rental property Thanks

The door is probably about 26 yrs old

Unable to locate replacement parts for this sliding glass door. Would your product be a good alternative to original parts.