Viewing all customer Discussions for:

81-154 Tandem Roller Assembly, 1-1/4" Steel BB Concave

Roller is 3 inches long 1/2 inch wide and the Roller is 1 1/8 inches

Wheel diameter 31.8 mm housing width 20.5mm housing height 27mm

SGD-R20-180x95The part should be stainless steel and the part info as shown on the sticker on the door as shown in the attached image

Can you please identify the matching old metal sliding patio door roller? Door doesn't have a screw to hold the roller (only one hole for adjustment screw on the door; no second screw or hole to attach the roller). To take out the old roller, I removed the sliding door, removed bottom panel of ... (cont.)

Need to know what replacement rollers I need for the my sliding glass door, photos provided. Provided photo of the label on the door frame. It's the only written info on the door, not sure that is helpful. e door frame. Not sure that is helpful.

I'm looking for replacement rollers for the attached photo

Looking for this patio door roller - door is probably 30+ years old. The part is stamped with 41781. I looked at your part number 81-004, but I don't think this will work because the adjustment screw on mine is at the top (away from roller), but on 81-004, the adjustment screw is on the bottom. The ... (cont.)

Hi do you carry these or do you know some where I can get them? Thank, Bob

I need 2 bottom rollers for a james ray sliding glass door

I have a 35-40 year old patio door and am trying to replace the rollers. However, the new ones I see have two screws, with the upper for fastening and the lower for adjusting the rollers. Mine have only one screw, in the "upper position" (which seems to correspond to the modern-day attachment screw ... (cont.)

Rollers with hooks on the side that latch on to bottom shoe of patio frame door

I'm needing to replace the rollers on my sliding aluminum glass door but can't seem to find a matching replacement assembly. Any help would be great. 1-1/4" roller OD and it has a bit that is 13/16" wide that slides into a track in the aluminum rail.

Part # 1990-P4000-2SS

81-154 looks very similar to my roller but would like confirmation please.

Rollers are 1 & 1/4 " Width at adjust screw end 3/4". OA length. 3&1/8. OA length with rollers 4 ". Can you supply me with replacements?? Thanks. Paul

Rollers are 3 inches from front to back .

Do you guys know where I can find these?

Trying to see if you can help me with the part I can use for replacement wheels for the sliding door shown above. I have someone who can replace them but I have to have them before he will come and I don't know how to take this apart to get a picture of the wheel assembly. Assembly has 2 wheels pe ... (cont.)

Hello I am trying to replace my rollers on my sliding glass patio door. Problem is I can't fine the parts. I watch a Video on YouTube and they guy recommended you. Sending pictures of the part. This door is my way to the back so I need to get it fix. Thank you

2 tandem rollers