Viewing all customer Discussions for:

81-254 Patio Roller Assembly, 1-1/2" Nylon Concave BB

2 sliding glass doors installed in 2001-2002 in new construction in phx Az. WM is my only way to identify brand. Homeowner retained no records ?. Trying to find model number and repacement roller assembly?

I am looking for a replacement roller for my roller shown in the picture. Dimensions are shown on my picture. Thank you.

Our sliders are 40 years old. We need to find a replacement roller for one of them. The overall length of the housing is 2.25 inches. The width is 9/16 od. The height is 1.75 inches and the wheel diameter is 1.25 inches. The wheel is nylon. On the housing it says Product of DEL MAR ENG. CO. Lo ... (cont.)

I need a wheel replacement for this sliding door. No other markings besides the ones in the handle - see pics.

I'm looking for S&S VB 38 wheels for my vintage aluminum trimmed sliding glass doors. Can you help?

No markings or written info. Plastic wheel, approx 1-3/8" diameter. Size is 1-1/2" tall x 2-1/8" long (just the fixed portion, not including the sliding adjustment inner part that would make it variably longer). Pressure fits into aluminum sliding door (no brand found on the door, either.) Circa mid ... (cont.)

Need to replace a pair of rollers on an old sliding door with no markings. Kilian is printed on the nylon wheels. Thanks for your help!

This is from a patio door from about 1980s.

Can find the part anywhere but i comes from this company. Please help. K tab with dimensions of 1 3/4 height 2 1/4 length 5/8 width

Please help with this roller part for a sliding glass door. We are having trouble communicating with you, and getting a response to find out if this part can be found.

These were installed circa 1978. Nylon wheel on one side broken. Wish to replace both left and right wheel mechanisms if possible. If not entire mechanism (preferred), then perhaps wheels alone. Didn't take photos of mechanisms installed. I appreciate your help.

I need four replacements for these rollers.

Trying to find replacement rollers for 3 sets of rolling aluminum framed glass patio doors. My contractor said the little clip that sticks out is very important for how it connects with the door. Help please!!

Please send me a quote for the reference picture part.for 20eaBest Regards,Efrain

I have a cabin, circa 1976ish. My patio slider doors need roller assembly replacements. They are a single roller assembly. The stamp on the roller is. Product of Del Mar Eng Co Long Beach Cal Pat 3 670 357 (as best as I can tell) The roller has a hook tab above the adjustment screw. The ... (cont.)

I'm having trouble finding a proper set of rollers to fix my door. All I know about the manufacture of the door is a marking on the door handle W_M The door was installed around 1986 Please help, thanks John

If you can supply this wheel set, I will need at least 6 and maybe more. Thank you, Craig

Hello! My grandmother lives in Bakersfield, CA...in a house built in the 60s. She thinks that these wheels were replaced back in the late 90s...and i can't tell if they were replaced at the same time or not. Although similar...the wheels are definately different. I have seen posts on your webs ... (cont.)

I need 4 of these- - -if you don't have, can I replace the wheel and the shaft? can I get the wheel in anything except plastic?

Hi I'm trying to replace the door roller - see photo enclosed. It is a Del Mar part and is stamped patent pending. I've been on your site and seen the two items 81-255, 81-254 and they seem to be slightly different in size - see dimensions on enc photo Could you help suggesting a replacement part? ... (cont.)