Viewing all customer Discussions for:

82-247 Pella Locking Mechanism

How do you remove the lock stile to access the mechanism?

The answers to others' questions on this latch replacement are insufficient. The metal end of door leaves no visible/obvious way to get at the latch mechanism or any screws that hold it in place - it's solid metal that runs top to bottom on the door. Is there some kind of access when we remove the h ... (cont.)

I need the replacement rollers for my sliding door and the latching mechanism. I have attached a photo of the model in the bottom right of the glass.

The key lock item no. is 89144 and vend part # is PCS7281XO. only need the latch that door lock hooks on too.

I am looking for the plastic latch cover for an older Pella sliding glass door as shown in the pictures I am unable to lock the door without the cover.

This looks like the part I need! How do I get the old one out! it is not fully exposed & recessed inside door? Would I have to cut out wood on both ends to remove screws, insall lock then replace removed wood?

This is a picture of the locking mechanism on the inside of the door connected to the thumb mechanism on the inside of my Pella door. I haven't removed the part yet because I can't still make it work and I fear if I remove it, I will not be able to lock the door. Currently when we open the door, t ... (cont.)

Can I just order the lock to go with the handles

Need door handle and lock for older Pella sliding patio door

I need a replacement handle and lock kit for this door. the door is approx 20 years old.

I have an older Pella sliding glass door and I need the small latch that hits the handle mechanism to close and lock I will attach pictures.

I am looking for a replacement lock for my Pella 750 Series sliding patio door. The spring the holds the latch open to receive the hasp is broke. Ideally I would replace just the spring but have found no good replacement. I have not been able to find this anywhere. Any help would be appreciated. ... (cont.)

We are missing this faceplate, both top and bottom, on one of our 2 Pella designer series sliding glass doors. In one of the photos the part is shown. It is shown as missing in the 2nd photo. Part measures approximately 2-1/4" x 1-1/2". Color was probably originally almond but was painted to match w ... (cont.)

I have been unable to find a match for this lock/latch for a Pella sliding patio door, and would greatly appreciated any assistance

Look to see if you have latches for an old Pella sliding glass doorThe latches no longer lock

Do you have a replacement locking mechanism for my Pella Proline 450 series sliding door? There should be enough information in the pics to provide the necessary information to determine if you have a replacement part.Thank you,Keith

Looking for the correct part number for a mortise lock mechanism for a Pella 750 series slide glass door. Is it 82-247? I can't believe this part is almost $200 but I want to make sure I buy the right part. Please advise.

Do you have this patio door lock?

Need a replacement Pella sliding door latch

We have a Pella Sliding door "ProLine Series" that is about five years old. The latching/locking device needs replacement. The spring is broken. The image of the device is attached. Thank you for your help