Viewing all customer Discussions for:

23-505 4' Bifold Door Track and Hardware Kit, 4 Panel

From a 1960s bifold door. It has two metal pieces that sandwich a plastic u shaped acceptor for the pivot.

This is the top pivot for a bifold door house was built in 1968 this is a plastic rail Inside diameter is 5/8”. The picture part says Japan. Can you assist. Thanks.

I need to replace the top and bottom hardware. Track opening is 9/16 " wide. Outside dimension of track is 15/16" wide. The current bracket is 2 1/8 " long. Thanks for your help.

Any ideas where to purchase ?

I know this is a long shot but figured it was worth a try. During a recent renovation of a built in 1960 home, the top pivot hardware for the bifold doors in one room were misplaced and lost. I'm trying to see if anything like this old style still exists or if there's anything newer that would be ... (cont.)

Hi, I need to find a rail/upper brackets and bottom pivot brackets that will work with 2 different set of wood, bifold doors. (Full louver) The upper pivot pin is 1/4" and roller is 3/4" or 13/16" and the bottom plastic pin is 3/8" (bottom), 5/8" (top). (Half louder) The upper pivot pin is 1/4" ... (cont.)

We have a 90s style bifold door...2 sets for a bedroom closet. We have the original metal track. When we bought a new hardware set, the bumper doesn't fit in the track. Some people call it a Snugger as well. It's the little spring that sits in the middle of the track to keep the doors from popping o ... (cont.)

Looking for pivot bracket hardware for old bifold door.

Hi. I'm installing new doors in a new rough opening of 60". I have a pair of 30" x 80" doors (see attached). What hardware do yoh recommend d and can you put together a hardware package for me? Thanks for the help!

Do you have the track for this product? Product Code: 23-146. Ours is in bad shape and bent up.

This is upper roller on my bifold doors. The house was built in 1964. I have not found replacements for them and have several missing.

Hello, I am looking for replacements for this bottom track. I didn't see that exact track in your pics so I was wondering if you could help me identify them. Then I can measure the openings and order the right length. Thank you Marty

Hello We are refurbishing these solid wood bifold doors in our MidMon home, and cannot find any rolling top guidse (3/4" or 5/8" wheels) to match the existing system which I do not want to completely replace if at all possible. Two of the four top guides are missing I have combed the internet and c ... (cont.)

This is a heavy thin bi-fold door assembly. Please help!

Help,Do you have or can you tell me where to purchase the attached wooden bi-fold door hardware?Regards,Andy

Trying to find a good replacement track system for some old wooden bifold doors. PN 23-506 looks about right, but the opening is >4' and

I have wood bi-fold door and the top guide rollers on 2 sets of doors have broken. After looking thru your inventory I failed to locate the size rollers I need. My top guide rollers measure smaller than ¾" and bigger than 5/8". It also appears to be between 16 MM & 18 MM. If you can help me find ... (cont.)

Hi! I have several bi fold doors that keep falling off their contact points, both the stationary and moving (on track) points. The doors are old and super heavy, and the pieces are well worn. The piece that runs on the track stays in the track, but the door unscrews itself from that piece. It also f ... (cont.)

Do you have the track for your part number 23-306? I also have Stanley part number 2819 pivot bracket. I would like the track to be 48" in length so I can use one track. Your help is appreciated. Thank you.

HELLO THERE. I LIKE TO SEE IF THE 4' BIFOLD HARDWARE (Product Code: 23-505) CAN WORK FOR MY 2 BIFOLD PANEL 4O" OPENING WARDROBE. I PURCHASE THIS WARDROBE FROM ITALY AND CAME WITHOUT THE GUIDE AND RAILING HARDWARE AND THEY ARE NOT SENDING ME THE ITEMS. PLEASE SEE THE ATTACHED PHOTO. ... (cont.)