Viewing all customer Discussions for:

23-509 Bifold Track with Pivot Bracket, 3' Open

Looking for replacement track for my bifold door. Current configuration has 2-3 ft. long sections.

I need a bifold door top bracket that is wider than the 7/8 in brackets commonly available. The interior of my top channel is a full 1 inch. A 7/8 in top bracket slips out of the lower flanges of the track. Thanks!

Hi, I need to find a rail/upper brackets and bottom pivot brackets that will work with 2 different set of wood, bifold doors. (Full louver) The upper pivot pin is 1/4" and roller is 3/4" or 13/16" and the bottom plastic pin is 3/8" (bottom), 5/8" (top). (Half louder) The upper pivot pin is 1/4" ... (cont.)

Customer track for metal bifold door. Door guide replacement request.

Hello, I am interested in replacing these broken bifold door parts. Can you please help me identify the parts that I need? Thank you, Diana

Hello, I need a replacement bifold door track. Here are pictures. It is 3 feet long. I have been to Home Depot and Menards but they don't carry this style track. No names or numbers listed on the track.

Hello, To Whom hom It May Concern I am looking for the top track for a 30 ' wide mirrored bifold door keeping in mind that the pivot are about 2' in length Also need the bottom pivot bracket, Please advise

Hello! I just purchased a new condo and the bi-fold doors are in rough shape. I searched the part number I could findon the door, Acme 17-4405, and a question and answer thread came up where Paul from Swisco provided a very detailed reply. I'm hoping you can help me with my fix. My door has an ... (cont.)

Can the track be cut down to fit a 28 inch door opening?

What is the inside dimension of the top track (or wheel diameter) and depth (looking for a 1/2") of the 23-509? Thanks

Hello, I need to replace the track forum bifold closet doors. I have attached pictures. Could you please help me to identify the replacement part(s) I need to order? Thank you.

Trying to locate replacement for top pivot bracket for old bifold door. Plastic piece has ID NUMBER OF 150-6 A. Fits into a smaller track to hold in place. The track is 5/8 at the widest part and 1/2 inch for the slide in piece to hold in place. Any help would be appreciated. All the new tracks and ... (cont.)

I have a 36" bi-fold door replacement track which I just ordered from Swisco and installed. The door opening is about 38" wide so it was installed centered with 1" gap on each end. As you can see from the photos, I have a spring stopper which technically isn't needed (i.e. it wasn't there before). ... (cont.)

We have a 36" track which is 1" wide needs replaced since it is somewhat bent. We also need the following hardware replaced. Please advise on what to order. 1. Track 2. Hinges 3. Roller 4. Top mount 5. Bottom mount

I am trying to locate parts for #DPBTLLW36 Kimberly Bay Bifold Doors 1x36x80 the pivot brack. The ones that came with it are to long for my application. I just need them shorter so they actually bump up next to the end of the track and will also allow the door to open tighter together. I am installi ... (cont.)

Hi I am looking to replace the track just like this one for my other closet door . The track itself on this one measures 31 inches . The bifold doors measure 31.5

I,m looking for the door slide for a 24" door. The track is 3/4" outside width, inside is 5/8" best I can tell. I will also need the pin that goes in the top of the door. Thank you for your help Bob

The track in my door is damaged. I need a replacement and I'm having trouble finding a 32" track.

Dear Sir/Madam, Can you kindly help me in identifying this track? Thanks and best Stefania

My doorframe is 32" wide, can this track be cut down? My door is louvered wood, lightweight. Thank you!