Viewing all customer Discussions for:

32-119 Grass Adapter Bracket Pair

We have a 15 year old Mastercraft kitchen drawer that has it's rail parts worn out. Need a new set. The longest rail part is 23 1/16".

Looking for replacement parts

I have Unigrass 6600 drawer slides on drawers of 18 year old kitchen cabinets. The bracket attached to the rear of the cabinet has cracked. What replacement part would work for this? I have a feeling there will be more. Thanks!

I need a mounting bracket with a 3/8" peg for insertion into a drilled hole in the cabinet rear panel. The rail is nominal 1" x 3/8" x 22.5" and is stamped with the logo G*. The manufacturer is Grass. My cabinet was installed new in 1986 when my house was built.

Maybe 20 years old. Socket type. See photo. Thanks.

Please help us to find relacement for plastic piece that holds drawer bracket.

My drawer tracks are UniGrass 6600 series. I have several with broken back plates as pictured. What back plate replaces the old ones?

I'm writing for recommendations of a replacement drawer slide. The original is a G.Grass that was installed with the house 25 years ago and seems to no longer exist. The original track length is 22" the drawer length is 21 1/16" Drawer height is 4", drawer opening is 4.5" tall Drawer width is 26 1/4 ... (cont.)

I am looking for this part. Back of drawer. This connects to a metal bar. Holds the drawer slider. The one picture shows how it looks assembled. It has a screw in the middle. This is not part of the part. It was a fix for the other one that broke also Thank you

This is the bracket on the rear of the sliding drawer. It says unigrass 6600 on the track, we need a replacement bracket

Screws on to draw and wheel moves on track when draw is openen or closed

I am looking for the right and left hand plastic end brackets which hold the rearward end of the drawer guides into the back wall of the cabinet. These two-piece plastic brackets have two round peg type protrusions which insert into holes in the back wall of the cabinet. These brackets are made to ... (cont.)

I am looking for replacement drawer slide for the provided photo item. Also, individual rollers, if possible.

Where can I get this part replacement like the uploaded photo ? Thank you so much!!

The bracket had a number inside: 471029 and it says right and left. If you have I need 1 set and if you have 4 I'll take them. Thank you. Ally

Very similar to your part number 32-040 Except the roller is on the opposite side.

Bracket is 2"deep, slide in slot is 7/8"wide, back mounting is 2" long x 1 1/4" wide The lower lip keeps breaking out and the drawer drops. See pictures attached. Thank you for your help! JPG

I have two right hand broken pieces, I would be willing to buy 6 pairs since I have 6 kitchen drawers. Feel free to email me for more questions

Hello I was looking for the drawer slide support plastic bracket. On the drawer slide the following number. PMI-DM500L Thank you Tom

Plastic parts for drawers PPW093 rear metal bracket