Viewing all customer Discussions for:

32-119 Grass Adapter Bracket Pair

The plastic rear socket brackets have broken on my kitchen drawer. I cannot find the manufacturers name on the rails or brackets. the side rail guide outside dimensions are: 6/16 x 1 inch and 22 1/4 long. I need two rear mounted brackets (left and right sides)to attach this rail. The drawer it ... (cont.)

i think it's Product Code: 32-089 am i correct ?

Our Merillat, SPRINGBROOK rear brackets that hold the slides for the drawers have broken . They were installed new in February, 1988. Do you have them? Thank you.

The front of the one rail snap in the cabinet at the front. I am trying to replace the rails for this drawer. it's about 22" long. If I can't what can I replace it with and how do I remove the plastic thing on the cabinet without damaging the cabinet it'self. Is there an embosed part number i ... (cont.)

Looking for this part a right and a left version for drawer closure rail for pull out drawer.

Rear drawer track socket. 1" track I believe this is part # 32-089

I have unigrass 6600 side rails . I need a back mount for the slide . I've attached pictures

replacement drawer guides, pat #4930739 A home owner from Cleveland, OH says: April 3, 2011 I seem to have broken the plastic drawer guides. Can you assist in identifying replacement parts. I have attached pictures of the drawer location and rear guides that are broken. I removed the rail and it is ... (cont.)

Do you carry this.

The two pictures show the broken right rear bracket from the side and head-on. It's not been easy to remove completely, so I didn't do so for the sake of this post. Big box stores have brackets that fit the drawer slide, however, they're too deep. The bracket I need is 1-7/8" deep. I believe this ... (cont.)

Can you tell by these photos which slides I need

I'm looking for a replacement part for what I believe are Rutledge cabinets. This the rear mount for the back of the cabinet. The picture is of the left side railed mounted. The right side is what I'm looking for. The only identification I can find in on the drawer itself.

Please help me find a replacement for this drawer track back plate? Length overall: 3 7/8"Height (inside) 7/8 - 1"Base: 1 3/4" x 1 1/8" Supports cabinet bracket marked 'A550' Thank you!

No markings on part

Do you have this

11 3/4" long

Having trouble finding replacement part for this late 90's builder grade kitchen drawer. Bent slightly from wear.

Inside of socket has number 3808. Interior height is 15/16", interior width is 3/8", interior length is 1.5" and there is a lip on one side. Socket appears to have slight curve, as do the slides. Slides do not extend fully into socket.

Pics are of drawer rail rear mount. Drawers installed 1995. It can be used both left and right with one screw attached plastic fits over wood rail. Too replace all I would need 28 pieces. Greg

Need help replacing this broken rear drawer track socket and no idea how to match it. Pictured here is the left intact one. Thanks.