Viewing all customer Discussions for:

26-041 2" Pivot Bar, Keller

Window won't stay open & from comparing to other windows in The house the piece in the picture is broke. Do you sell the replacement parts?

This is from a spiral tilt window. I bought the sash last week. I need a set of theses I think it's a guide for the shoe.

Hello. I need replacement block & tackle sash for my Milestone single hung Series 1000 winodws. Need 04 of them in total. the metal piece is 23 inches overall length, 9/16 - 5/8 of an inch wide and 1/2 inch deep. The metal piece has a stamp indicating '22C' on it.

I NEED THESE PARTS FOR WINDOW PARTS GLAZING BEAD I NEED 12 FEET

My name is Michael Close the window in plwhere's the ballaser.

I have a 2 inch long pivot bar with a pilot hole on the top at 1 5/8 " The width of the pivot bar is 1/4 inch. The height of the pivot bar is 3/16 of an inch. I am looking for several of these can you help me?

I need the piece that connects to the window sash

Hello, I need a couple locking pivot shoes. The windows are 24 years old and have no indication of brand name. I already ordered 15-134 - Pivot Lock Shoe, 3/8" Thick, but it did not work because the hole was too small for the bar coming out of the window. The dimensions of the locking pivot shoe is ... (cont.)

Looking for a part to replace the broken pull shown in the picture.

What is the stem piece that inserts into the pivot lock shoe attached to the balance?

Hello, I'm looking for window clips for a spiral tilt window. The clips screw onto the bottom part of the window then the clip goes into the shoe which allows the window to go up and down. Thank you.

Are these available?

Better bilt windows

Hi, my name is Steve. I am looking for a window pivot parts

Goes on window slide

To You, I ordered some some stuff today from Swissco for old Kinco windows. Glad they were available. Hope this next item is available too. Not sure what it's called. It is located in the bottom of the sliding sash and engages the balancers. Thanks, Paul

Here is a pic of the guide rails the hole the pin goes in and the pin that isinthe bottom of the window.. I need the pins that go in the bottom of the window to hold it in the tracking you can find them.. Hopeful. Thanks

Trying to locate this part. It is on the underside of an ALENCO window.

Can you help me with these parts. Two balance springs, two shoes, two pivot bars and two top latches. The house was built in 1979.

I need part that engages balancer on a 30 year old Milgard style aluminum single hung window. The photo shows the a broken part and a complete part. Other photo shows balancer and window style. Please advise.