Viewing all customer Discussions for:

87-191 5/16" Flat Nylon Roller with Axle Pin

i need to replace some drawer rollers for the kitchen drawers. these cabinet and drawer units were installed in the early 60's. so far i have found nothing locally and hope you can help, i have included two photos to show what i am looking for. thanks for your time and assistance in this matter. ... (cont.)

Looking for these window replacement parts for the following items:Window roller 9/16" X 1 3/8" X 1Window round wheel 1/4"Window Seal Strip bottom= 1/4" height 3/16, gray color Please see attached photos

The plastic bases are intact. Maybe just need the roller and wheel inserts.

I'm needing some Milgard nylon wheels....actually ONLY need the wheel, as metal axle & Plastic frames are ok. Please advise

1980 Naples Florida windows. Aluminum frame. The rollers are at the bottom. Seem to snap in ...

Hi. I purchased 7/16" nylon wheels with pins from you for my older aluminum sliding windows. I removed one of the old wheels and put the new wheel in its place. The wheel fits and the hole for the pin lines up, but the pin is too large for the existing holes. The holes in the aluminum frame are ver ... (cont.)

Hello, I'm trying to replace these small circular plastic guides that support the side edges of plastic kitchen drawer bins. The drawers glide along top-mounted plastic glides that fit through a notch in the back of the bin that is shaped like an upside-down "T". There are then lips on the sides of ... (cont.)

Good morning. I Have been for replacement part for my folks kitchen drawers from the early sixties. Do carry these ? Thank you

This house was built in the mid 60?s.

I have a glide assembly that is similar to your on line unit 87-219 but not exactly the same. Mine has the attachment hole on the opposite end and a nylon glide shelf on one side. Do you have a replacement for my unit?

I am trying to replace the channel "fuzzy" weatherstrip that is 1/4 inch back and 0.160 inch "fuzzy". The sku number on the package my neighbor has is sku 049793878274 and the number P7827 was also on the package. He did not remember where it was from and no name was on the package. I need 50 f ... (cont.)

I need replacement rollers and weather seals for aluminum windows from the 60s whose appearance is attached. The roller is a nylon cylindrical wheel about 11.5 mm in diameter (7/16 ") and 5.3 mm thick. The hole is about 3.2 mm. The wheel is held in place and rotates around a nylon "nail" whose rou ... (cont.)

I just bought an older place and the windows are worn. There are metal rollers on the bottoms with a plastic pin snapped on holding it in place. The rollers are 5/8 inches and 3/8 inches. There are smaller rollers on the smaller windows, and larger on the larger windows. They are all side sliding. ... (cont.)