Viewing all customer Discussions for:

81-155 Tandem Roller Assembly, 1-1/4" Steel BB

I'm looking for part number for replacement rollers for a Milgard SGD-C30-96X96 5621/5631 sliding glass patio door

Please help me identify a set of replacements for my patio door rollers. Height = 26.22mm Width = 18.26mm Metal Wheel Diameter = 37.50mm

Hello, I need 4 replacement rollers for two United series 3131 vinyl patio doors. These doors were installed in approximately 1991 when the house was built. Photos with measurements are attached. Can you let me know which replacement rollers I should select? Thank you!

I need 4 new rollers . ASAP

Hi, these came off the bottom of a sliding glass door. They're bent and need to be replaced but I'm having trouble finding a replacement. A lot of the replacements that are the correct measurements have open tops, but I need a closed top with screw holes due to how it mounts to the bracket under the ... (cont.)

I need 4 pairs of the sliding door trolley schlegel 2231625, I had bought from swisco the wrong type and would like to order the correct variant, I have attached the old roller (rusted and cleaned), the new wrong rollers i ordered, and the drawing of the correct roller i require

I need to replace the roller for an exterior sliding glass door. Just want to make sure I am ordering the correct part!

No door brand known.

Hi, I'm trying to identify which roller is closest to mine. 81-138 looks extremely close, but the width is not quite right. Is this the best suited one? Thanks!

Hello! Can you help me identify the correct two-wheel replacement rollers for my sliding glass door? See attached photos for the part I removed and the sticker on the side of the door. Thanks!

I need to replace the rollers in my patio sliding glass door. The issue I am having is the rollers measure at 1 1/4" but it is really difficult to get to rollers over the railing. I tried buying replacements at Home Depot but I can't get the rollers over the railing and they rollers will not attra ... (cont.)

Patio door rollers tandem wheel

Need to order two replacement rollers from a 2001 Hurd fiberglass? sliding door. No numbers at all on the assembly. Thanks. Joe

I am trying to get wheel replacement for our sliding doorAlso please advise if you carry sliding door handles.Regards Kaizer

Roller description; width 3/4" , hight 1.0", wheel diameter 1 1/4" slightly less, possibly 1 3/16".

Door was purchased from and installed by Tri State Window Co. in 2011. there are no identifying marks on mechanism. Rollers are ss, with a 1 1/4 od. Rollers are approximately 5/16 thick. They are attached to door via one screw. If you can match part, I would like to purchase 2. Thanks for your help ... (cont.)

I need this roller with nylon wheels. I will need 16 of them if you have them.

The wheels are 1-5/16th dia. and the unit is about 11/16 wide. Might you have anything that would fit? Regards, Mark

Advise part number and cost for this roller, which is not shown on the part.

I have a part number of 490540700 which is a carbon steet roller assembly I am looking to get a stainless roller instead for oceanfront house.