Viewing all customer Discussions for:

39-376 Encore Truth Folding Handle with Cover

Hi, looking for this operator, it's right handed and hinged. I bought a replacement from another supplier but the arm is not hinged.Do you have this in stock?Thanks for your help,Nick

Hello. I cannot seem to locate this exact dual-arm operator. Specifically, I cannot find one with the 3-screw hole piece that screws to the window on the arm with the hinge on it. Please help!!

Will the truth folding handle, Product Code: 39-376 fit an Anderson window. See photos

Hi I lost the pin that attaches the handle to the base of this pella crank. Do you have replacement pins or cranks compatible with this system? Thank you Heather

I need window operator shows as attached picture

Brand: TRUTHplease help me to identify the replacement part so i can order from you.thanksMartin

I need to find a replacement

Need this part

Looking for a replacement. Identifiers are: 092598 on the crank 41011 on the solid arm 31876 on the two piece arm. Brand is Truth on the solid arm.

This window is made by Crystal was installed about 20 years ago. The crank cannot close the window all the way as shown in the picture. The window width is about 21 inches. Can you help me identify what parts I need and do you have them? It marked ACER MADE IN CHINA on back of crank and TRUTH on cas ... (cont.)

I am looking for replacement folding cranks and covers for Integrity by Marvin Windows in Almond Frost Part Number 10896250 Parts for these windows appear to be hard to find. Any help would be greatly appreciated!

my crank is stripped and i need help finding this part. Can you help?

Pelli folding window crank in white with cover need 2, 1 each right and left hand

My window will not close all the way. The crank will rotate and not close all the way. I have not been able to locate or identify the parts.

I need help identifying the crank piece so I can order a new one.

The round part the crank fits into (photo uploaded) has number 308003 A etched on it. The diameter of the opening is 6/16" and I believe is has 12 grooves on the screw like attachment to the base. Thank you for your help. Part is white.

Both windows will only open and close by hand. Crank on both sides do not work

Having issues with my casement window mechanisms. They will not close / retract properly. Gears appear they are slipping. Would like to get a replacement for all 4 windows 2 are left hand swing 2 are right hand swings Window Manufacture is Ply Gem

Window parts Plastic part around the roll out needed on left and right sides 3 sets needed

Hi, I am looking for an operator for a 1989 Hurd window, the pics are attached.