Viewing all customer Discussions for:

26-063 3" Pivot Bar, Keller

Hello, I could really use some help identifying these parts and finding replacements. The pivot shoes are about 4 inches and the bars look to be 2.5. I can remove them if needed to verify. Thanks! Walt

Hi I have 6 double hung windows in need of new hardware, Pivot shoes and pivot bars. My math tells me that I need 24 pieces of each and if I purchase 25 of each I'm farther ahead and I will then have a spare of each. I also need a spiral balance charging tool. I think I need the 15-047 pivot shoe an ... (cont.)

hi- please help me ID this pivot bar. The windows use the middle screw hole, not either of the squarish ones. I am having trouble determining the exact point to measure from, therefore I am unable to find the appropriate part on your website. Thank you!

WE ARE NEEDING 6 PIECES LIKE THOSE SHOWN IN ATTACHMENT. WOULD YOU HAVE THEM? ROGER

This pivot bar is from the lower sash window. I could not find any numbers or names for the window manufacturer or the pivot bar itself. I have 14 windows with 2 pivot bars per window. Most are rusted due to our Florida salt air and need to be replaced. Thanks for your help. Susan Shirley ... (cont.)

Good afternoon, I have attached a window pivot bar that needs replacing. The item closely related to the one I have is item #26-063. The measurements all line up but there are slight differences with the cut-out holes. I do not have any markings on the window with regard to product/manufacture ... (cont.)

d

I would to confirm that you have the following parts: 1.Lock shoes: see attached size of lock shoe. 2.Pivot bar: Specially the position for two screws. See attached for size of pivot bar. Thanks a lot,

We live in a loft in a hundred year old textile mill that was renovated a decade ago. Attached is a photo of one of the four large windows in our unit. In the fall and spring, we like to open the bottom windows for fresh air circulation. All other sections are stationary. The windows are double p ... (cont.)

I have a Pivot Lock Shoe that looks like 15-047, including the black cam, and matches all dimensions except for the thickness. I measure 9/16 inches with the cam fully recessed for raising and lowering the window. With the cam extended when tilting the window, I measure 5/8 inches. The channel ho ... (cont.)

I have 5 windows in my home that use the 26-063 pivot bars. Some of the bars have twisted/bent. What causes this. When I replace the pivot bar should I also replace the pivot shoes (looks like a 15-015 shoe)? Thank you Tom

I have attached a few photos of the pivot bar that has snapped in half on a couple of our windows. I took the window in to get the glass repaired when it fell and not one company could tell me the manufacturer. I bought the house 5 years ago with these windows. I searched your site for pivot bars an ... (cont.)

I'm looking at replacing a number of pivot locking shoes, part 15-047 looks like it is the right dimensions, I also need a number of 3" Pivot Bars, part 26-063 again looks to be the right dimensions, does this pivot bar fit with this pivot locking shoe? Thanks, Chris.