Viewing all customer Discussions for:

26-063 3" Pivot Bar, Keller

I need to get a quantity of 14 pivot bars as shown in pictures

Hi, when the window opens, and I try to hold it, it won't stop, just sliding down. I am trying to replace it. Is it only to fix this issue, by the way?

Please help to identify items ,thank you

All I see is a #4 on these plastic pcs.

3 inch brass pivot bar for vertical slider. No identifiable markings found

cust has very old pivot bar, all of his pivot bars are snapped/missing the pin at the end, but what you see in the photo is 3", the width is approx 1/4". cust is not sure at this stage of window make or model, we are trying to see if you folks have anything close to this. Cust thought that part num ... (cont.)

I need replacement parts for my windows and would appreciate you letting me know what these are in the photos I've attached.I think they are called Spiral Sash Support Balances and the associated hardware. Please let me know if you carry these

Please assist with identifying part number

I have three windows that will not remain open. I have replaced pivot shoes & balances before but non this style. I'm having troubling locating the parts on the website I need. Top coil is stamped 4, bottom coil is stamped 5. Pivot bars are the C channel style.

Need the part that the sash slides into on a Silverline 8501 series double hung window

pat 5.353.548

Number on counter balance PAT5,353548

please help identify

I need to replace my existing window balances, I found them on your website. Item described below. My question: is there such thing as a left or right or are they interchangeable? The ones I have now say 8R and 8L which makes me think they may be side specific? 8 lbs Series 161 Roller-Tilt, Pr ... (cont.)

Hi, the photo IMG 5832 is of the bottom of the window part that connects the Spiral balance. This photo is of a pivot bar on a working window. The window in which I need replacements of that bottom connection is rusted out. It seems to be approximately 3" long. Do you know which pivot bar I would or ... (cont.)

Plastic slider that spiral balancer is attached to and a metal bracket that connects the window sash to this bracket allowing the window sash to be opened closed and tilted out for cleaning I would need 4 of these

I am looking for the left side of the 7r quick tilt and bar And the bar for both right and left of 9 quick tilt. Thanks

I am looking for replacement coil springs for my window, they were made by gorell the windows weigh 14 lbs and are 35" wide by 21 1/4" tall. the channel the spring and slide runs in is 1 7/16" wide by 1/2" deep. I am not able to remove the slide without having to cut the channel and i am unable to f ... (cont.)

Help ID part for replacement of broken spring. Left Side. PAT 5.353.548 Double hung window. Also information on replacement of the spring.

Pivot shoe is 9/16. Pivot bar is 2.75 inches