Viewing all customer Discussions for:

39-387 Split-Arm Operator, Wright

Window crank is stripped Won't close window Is 39035. The right replacement part Follow to a previous question with better picture Thanks

The two casement windows were installed in 1985. On one part of the metal is a number: 30744. Also, the name Wright is on the metal mechanism. I'm looking to replace the whole mechanism and crank.

Need parts. Handle will not stay on Lock on right side cracked

Do you have this casement operator arm? I need one.Chris

Window cranks need to be replaced 07900 is on the arm

I found the numbers 07900 atamped into the arm, windows are old wood casement windows, cant find a manufacturers name on parts or frame. Theres a plastic guide that slots into the track and is screwed into the bottom of the actual window is whats broken. Hope you guys can help, thanks,Jason ... (cont.)

I need this operator and the crank mechanism. Can I order this on this site

Hi attached are pics of a Hurd window. I need to order two of these operators. The number is 07900. Do you have this part?Steven

Is this 39-317?

Wright replacement cranks needed right and left, old ones rusted not working . Cranks and operator needed. Not sure about correct one to order.

Looking for this part needs replacing. Window won't crank

Hurd casement windows Need right and left split arm Installed 1995 Goldtone hardware Window size 23 x 35 From the base to where the right angle arm attaches is 4 inches the small arm piece that attaches with the sliding clip from the stud to hole is 3 1/2 inches 7702 imprinted on bottom ... (cont.)

I am told these are Vinyline windows. The crank mechanisms are shot. Are replacements available? Thank you.

This is bent and broken on the opposite window. It cant be opened. Need these parts but for one that opens opposite direction. Thanks

I ordered parts to repair a 7500 series window, which I received. However, the operator arms are not the appropriate size to accommodate the window. I have attached photos in an effort to determine what the correct part is to resolve the issue. The parts received: 39-387 & 39-388 are too short and n ... (cont.)

I would like to order for my American Craftsman casement Windows. It was suggested I attempt to locate a series number and/or take pictures. I have included some photos of the operator arms/hardware. I would like to order 2-left & 2 right operator arms.

Hi, there is a sprung window crank and I need to replace it any idea on what I can use?

I have this Wright operator. I see in the past you have recommended 39-387 and 39-388 for this operator. The latch looks the same but the measurements of the arms are short. What do you think?

I need a replacement for both left and right operators.

I have Wright casement windows. One of them has a stripped worm gear. Everything else works fine. Can this be replaced? I believe that's all it needs. Hinge works fine, but this operator is stripped.Also,, can I get replacement lock levers for these Wright windows. Thanks.