Viewing all customer Discussions for:

39-387 Split-Arm Operator, Wright

I am looking for a dual arm window, crank compatible to the picture shown

Gear to open and close window non functional. The drive shaft is extended out. And not engaging. Two Attached pictures. First is tag on upper inside of opened window casement. The second shows window in open position. The bracket is attached to the window with two screws, and is part of the cra ... (cont.)

Hello, hoping you can identify this window crank. I would need several rights and several lefts. Preferably the same color but does not have to be.

looking for replacements for old Hurd window sill mounted operators. model 55101 and 55100, gold in color.4 3/8" arm and 3 1/2".

I need to Replace these Split arm window operators I'll need 9 Right hand and 6 left hand along with 15 handles. Do you have compatible replacement parts guaranteed to fit. I found part numbers which are 39-317 39-318 and 39-114L for handles will these be the rite ones to replace mine I have shown. ... (cont.)

All of my windows have "play" in them when the are open. The crank will move at least a half a turn before the window moves. I believe I need to replace the full crank hardware. I think I need your 39-387 & 39-388 parts. Could you please confirm for me. I have a total of 17 white I need and 2 b ... (cont.)

Hi I have these incasement windows. I like to find out if you have these or equivalents that I can use to replace couple of them that needs Replacment . Any advice will be appreciate it . Looking forward to your comments . Tks Alex

What colors do these parts come in? I need Bronze

Looking for 3 left hand operators. 7702 is on the back of this one. I think I need the 7701 operator? Do you have this color? Thanks, Annette

See photo. I ordered a Truth Folding Handle with Cover, but just learned that I need the whole assembly. Can I return and get correct one, or can I just add the cover and handle? Please let me know. Thanks.

Looking for replacement parts if you have any

Hurd casement, gear mechanism stripped. Need replacement

The window was torn off in a wind storm. Window is fine; hardware bent and apparently damaged beyond repair. The window itself is completely salvageable and can be re-used; hardware, toast.

Do you have cranks by Wright #07900 for Hurd older casement window. I need one right and one left.

Hello Swisco TeamsI have the picture I did not take out Crank operator because they just ask how much will cost to replace.To take out this operator from window sill is complicated. They are install child metal guard. So, I need to remove it to reach unscrew bolts and measure operator. See attache ... (cont.)

I took the pictures from the side that was working (left side from the outside). The worm gear is stripped on the one I need and I didn't want to open again just to get pictures.

I am looking for a left and right replacement for the attached wright window cranks.

I'm looking to find a locking lever and the replacement parts to open slider arms crank etcasement window. Del Mar Toronto. White

I need a replacement part For the bottom Outside window bar that is straigh and on the left side of window, with bracket on the outside window sill.. Also looking for a right side window crank. Windows were installed 1995 by Garner windows.

Good Day, Looking to replace window crank. The crank is for a bedroom window that opens to the right...4 inch base. One of the arms has the numbers 07900 stamped in it.