Viewing all customer Discussions for:

81-270 Patio Roller Assembly, 1-1/2" Steel Ball Bearing

I am looking for replacement rollers for several sliders and windows at my condo association Hopefully you can match something up that will work. They are probably 10+ years oldThank you Dave

Dimensions 2-1/8" longer 1 3/8" high & 3/4" wide

Hello! I in need of a number of replacement rollers...1 1/2" diameter single wheel roller. The roller cartridge inserts into the bottom frame from the side. The frame needs to be dismantled to remove and replace the roller cartridge. The metal frame of the cartridge is 2 1/2" and the total might wit ... (cont.)

I am looking for roller for my screen door i noticed your product 81-046 looks very similar to the the existing roller on my door but mine are nylon wheels would you have those? hope this enough info

Hi, looking for this roller assembly, pictures are live so if you take the measurements they will be of the exact size . I would kindly appreciate you take the measurements so it will be more precise . This roller assembly just slides into a slot under the door , no need to screw it anywhere . There ... (cont.)

Looking for two rollers of the type pictured

Hi There, I can't find these patio door wheels and I was hoping you'd have a recommendation for an alternative that might have the same function/size. There is an inner housing that slides down to adjust the wheel 2 1/8" Long 1 1/4" High 5/8" Thick 3/4" Thick at the end with the lip 1" Wheel Diam ... (cont.)

Good afternoon, Can you please tell me what replacement rollers I need to purchase from you for my doors? Attached is a picture of the sticker on the door. Thank you, Gabriela

No markings on the door or rollers. I had to remove the right rail with 2 screws on the top and 2 on the bottom to access this roller.

Hello, I am trying to identify which wheel assembly I need to order. The adjustment screws for this one are behind the fringe that covers the track. They are not on the outside like many others. It appears that the top and bottom rollers are just a single roller design as well. Thank you. ... (cont.)

I think it is close to the 81-286, however the dimensions of the 81-286 are not the same as the part I have. I have looked through all the single wheel patio rollers and do not find any others that are like this. Am I missing anything? What are your suggestions?? Is there any way that I could just ... (cont.)

Hello, here is the information that I got off the door. PPG Herculte-K-Tempered Safety Glass, ANSI-2971198. Swisco SGCC-1112 401489. I'd like to order four replacements if you can provide me with the correct item number. Thanks!

The doors were installed in 1977. There are 8 doors total in 2 units we own. All the rollers need replacing.

I have a house that was built around 1960 with a 4-section patio door spanning 20'. The 2 moving sections haven't really worked well since I bought it about 3 years ago. I took one of the doors off and saw that the small gears of the aluminum ratcheting mechanism are worn out, preventing me from adj ... (cont.)

hello: I am trying to find rollers for an old skyline door and I think code 81-270, which is like the 1.5 inch roller I have, will work, but the 81-263 seems good too, but it is a smaller wheel. Is a big deal to use a smaller wheel, assuming all the rollers are replaced? Do you do COD delivery? ... (cont.)

Hello! I'm looking for roller assemblies to replace the one in the picture. They're very hard to find! This one looks like it might do. The height isn't quite the same, but depending how low the wheel can go, it might be ok. The dimensions i see including the flange at the end are good. However, ... (cont.)

I am a professional property manager and need to replace a number of rollers on sliding glass doors. The doors are approximately 20 years old and have no identification on them. They are shown below; do you have replacement parts that I could use and if so, please give me your best price. Some of ... (cont.)

I am looking for your part 81-270 but with stainless steel rollers

No marking but 2 x of these bottom rollers per door., one at each end.

HI Guys, Didn't see a match in your online catalog. Can you help me locate this? Enclosed is a picture. thanks! Wheel is 1 1/2 3/4 Width - @ lip 2 1/8 Length 1 3/16 Height