Viewing all customer Discussions for:

23-079 Sliding Mirror Door Snap-in Guide

Dear Swisco, I would like to replace/upgrade all the hardware for my sliding mirrores closet doors. The closest is 46.5x80 inches. Each mirrores door is 78.25x24.5 inches.

I would love to find replacements. Thanks.

Need a nylon top guide for sliding mirror closet door

I am looking for the plastic part shown in the picture on the right side door. It looks like it snaps into the metal bracket. The door swings out freely on the left due to not having the plastic guide piece. Any ideas?

Sliding closet doors. I need this part. Do you have it?

Rm-g1003 plastic top flat slide top 2 per door I have roller on bottom track

Hello, i am looking to replace my mirror door hardware including bottom rail which was removed during remodel. Attached is the current hardware on the doors. Do you have a suggested replacement? it does not have to be this exact style and willing to upgrade hardware with a suggested style as long as ... (cont.)

Guide for a glass sliding closet doorRM B3000. RM G1005.

I need one of these.

I am in need of parts for an old installation of a ContractorsWardrobe bypass closet closure. Please see pictures of top and bottom guides/rollers. Seem to be similar to your PN's 23-028 and 23-079. I don't see the top guide bracket on your site. I would require 2 bottom rollers, one guide bracket, ... (cont.)

Below is a photo of the hanger that mounts on the top of a Monarch Sliding glass mirror closet door that has inexplicably disappeared from my door.

The pictures are the sliding part of the doors, There is no rollers. Need a part that can replace the one in the pictures. It swivels back and forth, want to replace all 4 of them with a part that has rollers. The piece that screws to the door frame it is #6. Please advise as to what part you may ... (cont.)

need both metal and plastic part show in the picture

I need the (2 sets of 2)plastic clips that adhere to the top of the Monarch mirrored doors and a new track or 2 (depending on cost). Without these clips, the smaller door sits under the too holding bracket? but which will cause the door to fall. Are the brackets on the smaller door (with the nylon ... (cont.)

Need to replace parts on closet door

I am looking for a Bottom Track that is 69 inches in length and approx 1.75 inches wide. It has two tracks to accommodate dual mirror doors that each have 2 concave wheel assemblies that mount to the doors. Also looking for a top plastic pieces that mounts to top of door to keep door in the upper tr ... (cont.)

This piece is rubber with one screw that attaches inside the upper track of a sliding glass closet door. I believe its purpose is to keep the door from wobbling in the track as the outer edges will lightly brush against the track sides. There are two of these rubber pieces; one at each end. I som ... (cont.)

There are two channels that the door slides in. We need replacements for the plastic pieces that hold the doors in these tracks. These are on the top of the door. Can you recommend a part? Thank you

Hi the handyman said 2 years ago he put clips like those on the closet doors and now that we moved out he cant find them on the doors so they are wobbly he said and doors need to be replaced since the clips cant be found. In the 2 years living there I have never seen these clips on the doors. I went ... (cont.)

Hello, I have a monarch mirror door AFG161290. I need 8ft of track, rollers for 2 doors and the plastic guides for the top. Can you help me with placing an order. I have supplied photos of all