Viewing all customer Discussions for:

39-105 Stainless Steel Detach Clip

Handle broke at operator. From video it looks like I need Truth Dyad Operator 39-316, stud bracket 39-514, detach clip 39-105 and crank handle 39-114. Are these the correct parts?

Right one.

I need to identify this hardware for my window sink. The crank and handle is broken for both of my windows.

This piece has broken off the Andersen casement interior bracket. Can you please let us know if this can be replaced or if it is part of a larger piece that we would need to replace the hole crank assembly? Thank you.

duel arm casement operator with a 2 13/16 link arm like a 39-156 but with 2 13/16 link arm

Attached are the requested photos

I am searching for replacement window clips for some vinyl casement windows. I cannot find anything that look comparable to these online so I am hoping that you can assist me with this issue.

I identified the locking handle 38-090 now I need the operator , the old operator is missing so I am left with a 1/2" x 3" rectangular hole in the window frame and 2 mounting holes in the base of frame the casement is hinged on the left hand side looking at it from the inside. I think it's the 39-31 ... (cont.)

I need a replacement crank I think the product code is 39-188 and I need the replacement screws and a clip for the arm. Thanks for the help.

Stainless steel window clip

Bad hardware on a vinyl casement

The nylon roller that guides the window to open and close is worn out and needs to be replaced. The window opens all the way with no problem. But when it is cranked to close, the roller falls out of the side slot and the arm continues to rotate inward, leaving the window in the same position as when ... (cont.)

Your 39-316 Truth operator shown in your video on replacing old GU operators, appears to be the one I need except for the sill mounting screw locations. Using the 39-316 operator, I would have to drill new mounting holes - I can do that if necessary. The important question is whether the operator wi ... (cont.)

We have an old casement window. I don't know the manufacturer (hence my reason for contacting you). Do any of you recognize it? There's only one identifying mark stamped on the short portion of the split arm. The long portion of the arm is about 5 inches. Sorry I forgot to measure the mounting hole ... (cont.)

I hope the pictures provide enough information on the parts I need. It's a bow window over 20 years old. The 2 pictures of the part needed is of the right window. The same part is needed for the left window

I need the clips that connect the operator arm to the pin. See phoyo

I have to casement windows in my bedroom that need replacement parts. I have attached two pics for you to see part number and type of crank. Part number is 14D501.

HelloI received order number 2125720 for parts 39-187 and 39 105 I have replaced these parts on another window in previous years and still is working well . this one i replaced and the retainer clip keep slipping off even after i lock in place i crank window in a few times and it slips and i have t ... (cont.)

I have 8x right open casement windows and 9 left open casement windows. The roto parts are corroded due to the salt water environment and I am looking to replace the associated parts. Any help would be greatly appreciated.

Hello! I was searching for this piece on your website but I couldn't find anything like it because I don't even know how its called. I know it's a crank but I need to know what the thing in the blue-ish circle is! Hope you can tell me, thank you!