Viewing all customer Discussions for:

39-546 Truth Snap-Stud Bracket

I'm not sure of the value

Please see attached and let me know if you can help or need more information

Need the completely parts

The teeth in the gears are stripped and you have to push the window from the outside to open. It is a truth product from about 2008. The first arm measure 4.5 inches from the finished housing to the outer end. The second arm measure 5 inches. The bracket is 3 inches. Looking for replacement right an ... (cont.)

jeld wen split arm casement window operator. I need both right han and left hand curn

Hi there - I am not sure which replacement part(s) I need to fix the cranking issue. The crank works on closing the window, and only when the window is open a few inches (I push it out). The only info I was able to see are marked in the pictures attached. Please advise which part(s) I need to replac ... (cont.)

Dear Swisco, I'm looking for this replacement part for let and right side. Please let me know if you have them. Thanks, Q

Two of our windows are missing the black part that attaches to the window

9D504 is stamped on the left opening hinge shown above. 9D903 is stamped on the right opening hinge shown above. I need both right and left opening kits including handles which are stripped out. Please let me know part number and order process.

Looking for replacement parts for my window thank you

Vetter window operating mechanism, left side of window looking from the outside. Numbers 6603 on part from rail on window sill to under window. # 31850 from crank mechanism to bracket attaching to window. TRUTH symbol on pieces. This particular window is rubbing against bottom sill (lower right ... (cont.)

Sorry I can only show you the part as installed and as broken since otherwise I would have to dismantle the window. I don't know the brand of the window, but the metal does say "Truth" and 30905 on it. The townhome was built in 1995 so the window is probably that old This "Truth" metal is not conn ... (cont.)

I have several of these old windows across the house, opening from the left and right side. The only marking I found was image Quinn2...TRUTH 30744I am in need of new crank mechanisms for most of them, but also the plastic side pieces that hold the locking bar in place on the side opposite the hinge ... (cont.)

Looking to replace Truth Casement window operator, handle, covers and brackets. The attached picture is the part(s) I am trying to match. I need a total of 7 sets (L & R) assemblies (total of 14 assemblies). I am also purchasing replacement stainless steel screws. I believe the Swisco P/Ns ar ... (cont.)

Need right and left hand replacement - looks like might have been obsolete - looks like nwer model is rounded corners which is fine- need set right window and left. Depending on price probably will replace 3 window sets

#45352 on the crank, #31876 on the arm.The word TRUTH on it. Says made in USA.

One arm is stamped TruthBase is 4-15/16" wide, short arm is 4-7/8" long, long arm is 10"

Think it is a casement sill mount split arm operator, need a replacement. It doesn't close and need to push it from outside while someone cranks the arm. Can find only 2 stamp #s on it, attached are pics. Please let me know what else you might need.I found an old invoice for replacment screens and ... (cont.)

Truth 3095

Hello trying to ID and price the following handle - have more pics if needed