Viewing all customer Discussions for:

58-181 Pella Push-in Bulb Weatherseal

Here is a photo of the sliding patio door weather strip that we are looking to find. We are unable to determine the brand of the door. Door has wood interior and aluminum cladded exterior. Thanks for your help John

Patio door purchased around 1990; no serial numbers or markers on it. The vertical weather seal between the sliding door and fixed door needs replacement. It fits into a retention slot on the fixed wood door. Am looking for original replacement if possible or similar one. Caution note is that the ... (cont.)

Can you tell me what part this is for our wooden casement windows (home built in 1984). We have to replace the window seals for all of them and I cannot find this part. Thanks, Beth

I would like to replace the weather stripping in our doors. Pella has given me a item number and would like to order directly from you. Here is the item number that they have given me: 09ZR0120 - Pkg 20 CTFM Astragal/Frame Wstrp I would appreciate your help, Thank you, Crystell

I called Pella because the weatherstripping on my exterior door had failed. They sent me 4 lengths of pushin bulb weather strip but I have NO idea how to remove the old stuff or put in the new stuff. Can any one point me to directions? It's currently 15 degrees outside so I don't want to just rip it ... (cont.)

I have a pella sliding glass door that is 15-20 years old. I would like to replace the weatherstripping around the perimeter on the back of the interior pane of glass...the pane that has the blind attached to it. Need to know what this is called. It is no longer soft so i think its no longer creatin ... (cont.)

WE did not find any markings on the weatherstripping. It is an 8' 32" door...

This worn out weatherstrip is tightly adhered. Do you have a replacement? If so, how is the old strip removed? Thank you.

I need a replacement middle seal for my French Door. The seal has a width of 1/2 with a 5/8 in bulb. I The bulb is not sealed, but open on the back. I need to cover a 80 inch strip. The press in part of the seal is 1/4 in that pushes in a channel and the seal iextends out 3/4 in bulb creating the do ... (cont.)

I'm looking for replacement weatherstripping for a back panel on a Pella Sliding Patio Door. I've attached several photos of the weatherstrip. It appears to be similar to some of your bubble weatherstrips without the flat portion. If you flatten the strip it measures 3/4-7/8 of an inch. Panel is ... (cont.)

Dear Sir or madam: I'd like to replace a section of weatherstripping on our Pella door. The dog ripped it up in a few places. Do you carry the replacement genuine Pella weatherstripping? If so, do you have a tutorial or suggestions on how to install it. Pella basically wants my first born c ... (cont.)

I need a Pella sliding glass door seal. I believe the door was installed in the early 90's. Can't find serial numbers except on the glass. The attachment is a picture of the seal. The top flap is missing from the sample in the picture. This seal presses into the groove that runs parallel to ... (cont.)

from 1987 Pella door described on invoice as "6-0 trad.FR Door AI-24B " this is what I would call a exterior french door . same seal on both sides, center jamb and top .approx. 2@ 78.5" 1@76.5" and 1@ 69.5" . door swings in and is brown What number would you think this seal was ? 58-181???? ... (cont.)

I have attached some photos but is difficult to see. I want to avoid cutting a piece until I know Incan replace it. There are over a hundred of these in my building that all need replacing. I think it is most similiar to 58-181 Pella push in weatherseal. Can you advise?

Do you have a strip for Pella double French Sliding Doors? It is a black at the the inside door side corner that has a shape of small L.

Looking for rubber seal for pro line pella sliding door

Attached is a picture of weather stripping from my Pella door that is deteriorating. It measures about 1" on each side. Any help would be appreciated!

Please advise if you have a replacement part for this weather stripping. Dimensions are 7/8" at the jam side and 5/8" tall at the bulb side. Looking for enough for 3 hinged swing doors

Need kerf weather stripping for older Pella mahogany front door. Existing product looks like a "D" with kerf insert at intersection of arch and straight line - only 9/16 wide straight section. Curved section is not attached above this point. Appears to be vinyl with a foam filling. Pella is not s ... (cont.)

Hi, I've got a Pella sliding door from about 1985, with no identifying numbers. When closed, the sliding door overlaps the fixed "door", and they seal via a 5/8" soft rubber tube (hollow) weatherstrip that gets compressed by an edge on the fixed door. The rubber is maybe 1/8" thick. The weatherstri ... (cont.)