Viewing all customer Discussions for:

26-407 Corner Pivot Bar

This pivot bar is riveted on a window pro's window, I need several. I also need the coil balancers for these windows, the sash weighs 23lb. I'm pretty handy, I'd drill out the rivets and use self drilling screws to attach a new one. These coil balancers are a unit that appears to screw into ... (cont.)

Good evening! Here are pictures of an Armaclad tilt peg. The item is 13/16 wide and each leg is 7/8 long. Overall length is 1 5/8. The Tilt Peg is offset, so I will be needing the one for the right side. If you need more info I will gladly assist. Thank You!

marking: 1524 1478 C-A 1888 need left and right disregard the aluminum tape

The pivot I am looking for is a corner mounted pivot with dimensions that match your part 26-407 but the end matches part 26-164. It fits pivot shoe 15-105.

Hi, one of my window pivots broke and I need a replacement. They go around the corner and have 3 holes. Single hung tilt window, I think manufacturer might be "Window Pro".

The metal piece holding the window at the top (window pivot?) is broken on one side of our window

I need pivot bars this size for 15 windows (a total of 30 pivot bars). I've included a picture of the tag that came with the window, a diagram showing the dimensions, a picture of the pivot bar and of the window. Please help. Dave

Hello, hope you're doing well. I've been searching everywhere for these parts and can't find them. I removed them several months ago, so don't have access to originals right now. They're for my cousin that lives out in Puerto Rico, I'm in NY. - The balancers are 25 1/2" with orange tip, but they hav ... (cont.)

We have a few windows that have become un-openable. Upon further examination, we see that the shoe has broken on one and the pivot bars have broken completely off on another. There's a third window with the pivot bar broken off into the shoe.

Pivot

Length is about 2-5/8" Width is about 3/4" Height is about 1-1/4"

Bottom post that locks into track on a double hung tilt wash window

We need 2 sets of 27 3/4" balancers 4 sets of 33 3/4" balancers 6 bottom pins 1 window latch Please see attached photos

I am having trouble Mami g these parts and looking for them locally.

Looking for this pivot bar. Don't know the brand of window.PS. Here's a photo of the shoe.

This from that addition on my house that was added in 1986. I cannot find any identifying names or numbers on the windows

sorry I don't have installed pics. the back side has a pin that goes into the wood and is broken. The top at the screw hole is broken. There was no manufactures ID in window. I need at least 4 of these.

Guillitine window bottom corner

looking for a harvey window pivot set

No markings found. Windows are double pane, argon filled, hurricane rated, vinyl replacement windows from Ryman Construction (no longer in business) in Florida.