Viewing all customer Discussions for:

91-179 Slide Bolt Assembly

Vinyl Tech Venice FloridaPictures of window (36) that need parts

Look for storm door window slide bolt. No information on the door.

Hi, Do you carry this type of latch?

This is the corner of my window with a latch in place. Above it is the actuator part with the part to move it (witch is broken). Do you have anything that looks like this.

I need about 20 of these slides for my old storm windows that I'm refurbishing.As best as I can measure the total length is 2 3/4And the length from the handle to the long end is 1 15/16. The thickness diameter of the rod is 1/8".If this exactly is not available do you have anything close that I can ... (cont.)

How do you replace slide bolt assembly 91-179?

Is it possible to find replacement for the plastic handle, or enter unit? We bought a fixer upper and most of the plastic handles are broken or missing, making it very difficult to move the storm windows. Any ideas on what we can try if the actual part is unavailable? House was built in 1980, but th ... (cont.)

I am looking for these spring loaded guide pins for a sunroom porch. The are the ones that use thin plastic & installed like screen Thanks, Tom

Windows have a spring loaded pin that slides so you can adjust the window up/down, release it and it locks the window in place. The pins are breaking off and I'm looking for options on fixing.

I am looking for this part. It measures 3/16" diameter total, and 2-1/2" long overall The 3/16" part is 1-3/4" long, then there is a slightly narrower diameter 3/4" long wrapped with a spring. At 1-1/2" there is a hole drilled and tapped to accept a knurled screw as shown in the picture. I need 8 ... (cont.)

Several latches are brokens that need to be replaced. Do you have a replacement part like these.

Can you let me know if you carry these window screen clips. If you do t carry it would you know who does?

The part is a storm window slide that has a spring, then a plunger and a threaded insert that acts as the handle . I need about 26 or so since they all are corroded and break.

Slide bolt for storm window

Hello. 91-179 looks like a good candidate to replace what I have in my old windows. Any advice on how to remove the sash panels so I can do the work ?

trying to find this older style corner for storm panels

Hi, I found everything else I need to repair 6 Viking windows on your site but I can't seem to find the locking mechanism. I found the latches but there is also a slit on the side that has a little knob and a pin that comes out to lock the window for extra security when it is closed that I can't se ... (cont.)

Hi, I'm looking to identify & replace several damaged, spring-action locking pins. These pins are found within the active glass pane of a wooden framed screen/storm insert. I've attached a pic of both the damaged pin & the label to its wooden sash partner. I believe the sash & storm panel to be @ ... (cont.)

I've attached a picture of the part I'm trying to replace. I ordered and received part Product Code: 91-179, but it doesn't work because the smaller diameter side needs to be extended more toward the threaded hole for the knob. right now its' only a few millimeters and it needs to be more like what ... (cont.)

Hello. Can you please tell me what parts I need to purchase to repair the window in the photos? The tab that is spring loaded and keeps the window from falling down is broken off at the tip or windows edge so it no longer catches. The first 4 photos are of the working side. I tried to use your web ... (cont.)