Viewing all customer Discussions for:

40-207 Larson Storm Door Sweep

Have a 36" survivor storm door that needs new rubber strips on sweep. Have been having trouble finding one that fits. Can U help?

Good day, looking for the seal in the picture. It's a tee seal 1/16 by 9/16

My sliders have this t shaped weather stripping that fits in the grooves on the frame. The stripping tee is 7.9 mm. The fin is about 1 inch high. I have not been able to find it anywhere or find a solution to put 8n its place. Any help would be greatly appreciated.

This door sweep is taller than anything I see here. 1 1/4" tall with about 3/8" insert. Door is nominal 36" wide. Any recommendations would be appreciated. Numbers on the hinge side 14606082-122170814

Bottom seal is a dual lip. After 1-2 years it will not stay in the slot. I've had to cut reliefs on each side to ease over the aluminum threshold. I think? the original seal may have been a single lip? I do have a plastic coated dog cable that we run under the seal. Even without running the cable, t ... (cont.)

My front door lets in a lot of light and air. I have tried a couple of weatherstrips, but none of them fit the slot in the door. They are double doors, the door that locks in place has an extra black attachment (guessing it is called an astragal) that has a T shaped slot for the weatherstrip to inse ... (cont.)

There are two of these that are 47 1/2". He ordered Larson doors at the same time, but can't remember if this one is a Larson 5/8" from top to bottom and 1/4" across. T shape. Thanks so much

Need Sandstone color retainer strips and Replacement Emtek 322 handle for what I think may be a Chambers brand door. Was installed around 1993, not certain. What color would the handles be available in? retainer strips as follows. 2 at 32" and 2 at 74"also need two rubber sweeps. They have a narro ... (cont.)

Please help to locate, Replacement sweep or extender one or both

Hello, need to order storm door sweep for a Pela store door along with the pile weather stripping.I believe the sweep is 3/8.

Manufacturer unknown. Only markings on door edges were hand written numbers 11 (underlined) then 276. Sweep top is dome shaped 3/16" wide and 3/8" high from top of dome to bottom. I measured the channel which is the same 3/16" wide or maybe 7/32" max.

I have replaced my doors weather strip several times because it rips. I have always used the double weather strip and wonder should I try the one layer instead. I have the Larson Secure Elegance storm door.

I am looking for a replacement door sweep for my Larson storm door. It is a 36" door and I am unable to find one with the correct profile. I have enclosed a photo of the slot for the sweep. Please send me your recommendation. Thanks, Wayne

35004032

how to install weather stripping

What's the difference in sizes between the 3 model #'s?

Need replacement door sweep for Larson Manufactoring Company Storm door model # 14604031

I just received the sweep I ordered last week and it is not the correct one I ordered item number 40-207. The dimensions were correct 5/16 by 11/16 but this head is different than the one I received and when I received was not a double sweep

I need to replace the bug flap at the bottom of my screen door. I have looked everywhere for a bug flap similar to what I have so I will only have to slide the old one out and slide the new one in. I have been unable to find a bug flap with an insert similar to mine. Mine is like a "T" shape. Can yo ... (cont.)

I am in need of a shower sweep,or some kind of suggestion to take care of water running out under the shower door. I do not have a make or an old sweep. Thank you!