Viewing all customer Discussions for:

21-174 Roll Guide

Need new roll guides. I'm looking at your part 21-174. How thick is the part? bought one from Home Depot and it was too thick to fit into the track--not wide, thick.

the part I need is the little nylon cap on the right end. The diameter of the wider end is 1/2 inch and the diameter of the hole for the pin is 1/4 inch. Pls let me know if you need anything more.

Looking for a small white plastic disc that fits on top of the tensioned pin at the top and bottom of a bi-fold mirror closet door manufactured by Independent Mirror Industries Inc., Canada. The disc slides in the upper grove of the metal track. I need 8.

Hi, I'm looking for replacement closet sliders. They are white plastic disks. My mirrored closet doors have them on the top and the bottom of the doors. The inside of the door says "Independent mirror industries, Canada." Can you help?

Hi there, I have an older Stanley bifold mirror door set. The plastic round donut shape slide in the bottom track is broken and needs replacement (the pin is still fine). Do you have the plastic replacement piece? I am also happy to replace the pin if you have one that fits the same track an ... (cont.)

Hi, I need a new pivot block (or whatever you call the part that slides in the bottom rail) for a bifold mirrored closet door. Problem is that the corner block and rail on my door look different than the others I've seen on your website. It's an old Acme 17-4405 corner block, and the spring-load ... (cont.)

Looking for the little round plastic part, that is located inside the track, as the one I have is cracked

Looking for a replacement

I need 4 of these wheels. They are 1/8" wide and 3/4" in diameter. Can't find them anywhere. Guessing they are from the 1980's when the condo was built. Can you help? Thanks much! Mb

I need to replace this wheel, I sure hope you can help.

I purchased these mirror bifold doors from Lowes and we are missing parts. We need the roll guide and snugger shown in these photos. Could you please let me know if you carry these replacements? I will include a link to the product I purchased. Thanks so much!!

Part is the bottom guide that goes in the track. Should be round obviously but its broke and i cant find replacement.

Do you carry a part that would work to replace the round slider on a mirrored bifold door. The original door is a Stanley, but the Reliabilt door at Lowes appears to be the same. They sell the doors, but not replacement parts. I believe Reliabilt doors sold by Lowes are made by mostly JenWeld or ... (cont.)

I am looking for a replacement parts for my Executive Mirror Bifold Closet doors. The bottom pin was damaged (looks like the disc broke on the spring loaded arm and now the bottom track is all roughed up and needs replacement as well. Any assistance would be greatly appreciated.

I am not sure what part may be needed but this closet door no longer works properly. It is fine when open but when you close it the top pivot rod on leading part of door comes out of the roller and the leading edge drops down. I have attached some photos with descriptions. Do you think a piece is mi ... (cont.)

Hi: Thank you for taking the time to read this email. I have a mirrored bi-fold 8 foot closet door where the roller guide wheel cap broke. I'd like to buy replacements for these wheels. I have attached photos of the door and the parts. Please let me know if you carry these parts and ... (cont.)

21-455 has how many rollers and end guides. Will it hang two doors or do need to buy extra set of rollers and end supports? Thanks, Peter

​Hi my name is Mathew, I have a Stanley bifold mirror door which is running on 2 tracks ( one upper and another bottom) and the door runs in the tracks on white plastic roller, one of the plastic roll is broken, I found a roll ( #21-174) in the website , i want to make sure that I found the right p ... (cont.)

Attached are photos of my bifold closet door. The bottom disk cracked. Do you know which would be the replacement? Also, how do I get the disk in the track when I get it? Do I have to pull up the track to get the disk in?

I am looking to replace the bottom track of Stanley Monarch sliding glass doors 50822981 / 64564-001. I also need the rubber rollers for the top track guides. Can you assist? Thank you