Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

For old 25+ years Gorell vinyl replacement window, I purchased a different model that came flush with the bottom of the sash and what I need is one that drops down below the sash with a 3/16 Tee. Possibly a 58-164 or a 58-171? Please advise Thank You Carl Lind

Need seals for 15 windows

I have tried to remove the felt strips that are in the groves but they don't seem to be removable or could the be glued? This window has major ice buildup on top and sides. No doubt that there is warpage but was wondering if I replaced the weatherstripping with a slightly larger size it would help, ... (cont.)

Hi, I am looking for replacement of the weather strip for windows in my house. Please let me know if you have this type of weather strip Thank you. Fedor

I am trying to find the correct seal for our Jalousie windows. I attached a picture of the seal which has a 3/16" bulb diameter and want to know what seal you have that would work. Thanks,

12 windows need replacement partsJames

Sir or Madame, I have a double hung window from which the lower sash bubble seal has ripped from the bottom of the sash. I'm not sure which is the seal you indicate may be the replacement (# 58-171 or # 58-182). I enclose pictures in hopes that you can identify which it may be. The window sash i ... (cont.)

Need vinyl weather stripping that goes on lower sash Between lower and upper sashBubble type with foam inside bubble

Need to replace weatherstripping for 22windows (18"x48") pictures enclosed.

Bottom sash weatherstrip and coil balance shoe.I need 60 feet of bottoms/weatherstrip for soft lite vinyl replacement windows. I also need 10 coil balance shoes. I think it is part number 15177 blue slate. I will send pictures to identify and wait for your reply.

Need to replace bottom weather stripping from jelly wen window. Number on window etched into glass is g402-01184-8703.

I recently purchased some Jeld-wen windows. On one of the double hung windows, the bubble weather stripping sticks out a bit and makes the window difficult to open. I called the retailer and they sent me to Jeld -Wen. They seemed familiar with the problem, but want me to fill out a report to decide ... (cont.)

both seal attached are approx 1/4" on the t-slot side and pile of the brush is approx 1/4" as well. The bottom seal on window is foam filled. 10 windows approx 28" wide 3 windows 22" wide

can you help me validate this is the right one based on the pictures .270 T-Slot Foam Filled Bulb Weatherseal,12ft

I'm trying to find a replacement for weatherstripping found on bottom of top sash which you can see has deteriorated on one of the windows. I bought these about 12 years ago at Lowe's. These are their windows that were manufactured in North Carolina. The weatherstripping is attached to the outsid ... (cont.)

Hello, I removed this bubble seal from our vinyl tilt sash window. The window is roughly 35 years old and I believe the company name was Vekaplast. We are in the process of replacing the pile weatherstripping and several balance rods. We have roughly 30 windows in total to evaluate. Any help identi ... (cont.)

I think it T slide 1/4 drop foam filled bubble seal

Looking for bubble window weather stripping. Foam core has broken down in almost all windows after 20 years. Slides into channel in window with the plastic "T" . Looks to be 5/8" wide overall. The foam cylinder portion maybe 5/16" and the overall thickness maybe 3/8". Photos attached with ruler ... (cont.)

Bottom edge seal. T strip looks to be about .187 Not seeing any one your site with the 90degree angle and the t slot on the correct side. Thanks for any help

Image shows the bottom rail of a single hung window. I cannot find any markings indicating manufacturer. Installed by builder in 1997. The T channel strip is shown (protruding from the channel slightly mangled) white hard vinyl. Exposed part is 3/8" wide, the internal part is about 3/16" wide. I ne ... (cont.)