Viewing all customer Discussions for:

39-547 Truth Snubber

I need to replace 5 white covers for Truth Entrygard Dyad window operator 39-035 as seen in some of the photos. I believe the cover # is 39-107. I need 5 white Snubbers # 39-547. I would like to get 6 of whatever part relaces the black one in the first photo. You can see that part in the last 2 phot ... (cont.)

I need parts for some Milgard windows - hinges and connect arms, and brackets. The part numbers for the hinges/connect arms is "HA0438TK 64XX/5421 TRK & SLDR ASS'Y EG". I also need the brackets on the vertical inside of the windows. I've attached photos with red arrows or red lines pointing at w ... (cont.)

I have a 2001 Milgard Classic Awning Window with accordion extension arms. End of each arm has circular hole holding metal piece that slides in track on underside of window and is held in place by a plastic clip. Only the metal piece on end is damaged/broken/lost (operating arm, crank and handle ... (cont.)

Weathershield said they no longer carry any parts for my 30 year old windows so I'm looking for the bottom 10" metal track that the window slides in when opening. Also need the plastic/metal part that is attached to the window, but slides into the metal track (maybe called a snubber???). The attache ... (cont.)

I am looking to get a replacement bracket for one side of a window. I am not sure whether these L shaped brackets are really needed but presumably center the window as it's closing.

Hi! I have a few of these. one the operator is broken and another the pivot slide is broken. I think I have identified it as these 2 but I wanted to verify. thanks! https://www.swisco.com/Pivot-Slide-Assembly/pd/Replacement-Window-Operator-Accessories/39-536 https://www.swisco.com/encore-awning-oper ... (cont.)

I am looking for a part for a Truth operator. its the part that the window slides on. One picture is the right side that has the part and one picture is the left side that is missing the part. Thanks

Hi. Looking for hardware to replace some rusted out parts that finally let go. The window did not make it all the way to the ground. I need the "upper" hardware for a window that opens out; from the inside, it swings to the "right". The picture showing the hardware needing replacement is from th ... (cont.)

I'm looking for one of these brackets, it appears as you shut the window there is another one on the window frame and it helps draw the window or guide the window in. Number on the bracket is 9798, it measures an inch an and a half, Tall

Hi. I'm looking for 10 pieces for a Marvin casemaster casement window.It is a snubber that is screwed onto the side of the sash and interlocks with a matching part screwed to the frame.It was Marvin's #10899110, but they no longer carry that part.There is nothing imprinted on the part itself.Kind r ... (cont.)

Need replacement parts

What is this little piece with two screws in it? I need to buy some replacements Thanks!

Have Freedom White Clad Casement windows from MW that are 24+ years old and they have white plastic keepers in the middle on the hinge side to assist closing and sealing. Keepers are L shaped 1.5in long with 5/8in side and 13/16in side with two screw holes Item # maybe 12983 but it's been a while si ... (cont.)

This part is located on the hinge side of tall casement windows. The post mounts on inside of the window frame and projects though a hole in the sash serving to align the sash with the frame and keep it from warping. The part is white plastic, tapered to almost a point and is about 7/16" diameter a ... (cont.)

There are no external marks on the small clip. It is approximately 2" wide, 3/4" tall, and 1 1/4" deep. The rest of the hardware on the casement window are all made by Truth (hinge set and operator). Thanks! Brandon

We have Truth hardware casement windows at home, installed in 1993. The windows are in great shape, but not so the sash snubbers. Those sash snubbers are rusting, since they lost the PVC inserts. Is there any way to get the PVC inserts for those snubbers from 1993? Worst case scenario, how diffi ... (cont.)

I have 9 M & W double casement windows in one room and all 18 snubbers are broken. All the measurements are the same the only difference is the ones that were on the factory windows do not have a insert. It doesn't look like that would make a difference. I will post again if they work. ... (cont.)

I have Kolbe casement windows (1991). On the larger windows, there is a L shaped bracket mounted on the window frame, with a curved plastic insert, apparently to keep the window sashes from bowing in the middle. Many of these plastic inserts of cracked and fallen off. Do you stock these inserts? ... (cont.)