Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Good Morning I have brought a house where several of the windows will not stay up. I am unable to find the model number or the name of the manufactory of the window. There is a logo on the window lock that is MW. I understand these parts are outdated, can you assist me in getting new parts for my wi ... (cont.)

I need to replace the bottom weather strips on my double hung windows, bottom panels. Pictures are attached, 34" each X 24 windows.

Looking for weather stripping for bottom sash of Ply-Gem 1500 Integral Mull Triple. Sticker shows: PWG-M-170-00081-00002 P-979431-8 879007

Looking for the seal in first photos. The other pic is from your web site and is one of the seals I need. Over 20 yr old Quaker vinyl, tilt in windows. T slide is 3/16 " height 3/8" width 1/4 inch.

All of my weather seals have degraded from direct sunlight and need replacement. Based on your listed products, I narrowed it down to #58-183 since it looks the closest to mine, however your diagrams don't show all dimensions. Please advise which part number you recommend as a replacement based on ... (cont.)

Weather seal old and cracked. Slides into a groove on the bottom of the window. No part numbers or manufacturer info visible.

My weatherstripping on my windows is over 20 yrs old. The windows were in the house when I moved In, so, I do not have any information on them. It appears I need t-slot offset bulb foam weatherstripping. Let me know if you need additional information. Thank you for your assistance. Cathy Culbreth ... (cont.)

Looking for correct lower sash bottom weather stripping bulb seal. Mfn # is 109-22-32655-WHT-6

Trying to find the right weather stripping to replace/refresh my Owens Corning windows. House built in 1949, windows replaced in 2001. Windows are still in good shape but some of the stripping (the stuff outside facing) is brittle and starting to fall off in the middle. The foam part seems OK but c ... (cont.)

Seal slides in bottom slot on window have 3 units all seals have broken plastic window they are 40" wide Picture attached

1/4 inch t slot

I have a balance that is 34a but I do not see one listed to buy in your catalog. Can I just get a 34b?

I am looking to replace the weather stripping on my windows. The stem portion measures 3/8" and the bulb portion measures 3/8". With the attached pictures could you please let me know which item to order. Thank you Dave Latini

Hello Paul, I have a question about a aama/nwwda 101/i.s 297 window other numbers found were h-r25-48x78 and H-r50*-36x74 (modif). So, your company Swisco has two different models of T-slot seals (1) is 58-182 and other is 58-183, one has full foam and other has foam with a hole in center. The prob ... (cont.)

I found my windows striping was damaged, please see the pictures. Do you think it's 58-183? Thanks

Hi I have a 15 year old Simonton windows broken pcs I need recommended parts thank you

I need to replace the weatherseal on several windows. I think I need 58-182 since the t-slot is 3/16. I am unsure about the bulb diameter as it is so compressed and rotted (see pictures). Please let me know if I have selected the correct product code.

I want to order some replacement weather stripping for all my windows. I have bubble weather stripping and the diameter of the bubble is about 9-10mm and the size of the base extension is 10mm.

I need some T-Slot Offset Hollow Foam Seal , the slot size looks like 3/16 and the bubble is about 3/8 it's old so it's hard to be exact.white in color Any questions please contact me asap !

I have double hung tilt replacement windows that are 25 years old. The windows still work well but need to replace the weather stripping especially on the bottom. Picture attached of the seal. Do you have this type of seal?