Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

I need weatherstripping and pivot bars. Unfortunately, I can't see the length of the pivot bars, as I can't get the screws off of the bottom of the sash. Many of the pivot bars are rusted, some completely through. If you have any tips on removing the existing screws, I would be grateful. Thanks! ... (cont.)

this one has no foam but could the foam one work.

Looking to replace this seal! Thanks

I am wanting to know if you have a weather stripping that would work on my windows. I hope the photos provide enough information for you to identify. I contacted Thermolite and they no longer have this item. Thank you.

I need to replace the bottom weatherstrip on older Jeld Wen vinyl double hung windows as shown in attached photos. Thanks!

Need both sides of window weather strip

Hello, I have Anderson Double hung SilverLine (Product ID 3001) windows, that I would like to replace the bottom weather stripping on. See pictures of existing weather stripping. Also, if you can ID the window, I would like to buy replacement top weather stripping as well, which looks like a pil ... (cont.)

This part of my window is broken. I cannot pivot the window. I also need the rubber strip that goes on the bottom of the window

Looking to replace the wool pile weatherstripping. I have(5) pieces of wool plie. Which include three on sash mating surface and two on side mating surface. In addition, I have (1) White flexible and rigid PVC extruded seal on bottom of sash. Looking for part number and cost estimates. The base/weat ... (cont.)

I have been trying to find a replacement for this gasket that sits between the top and bottom window panes. While this has a t-slot configuration it is slightly different because the T is at the edge and there is a decent U shape before the bulb.

Can you tell me what size I need for replacement weather stripping

In need of replacing this weatherstripping, however not sure which one should I be purchasing. Can you please help?

This photo is of a gasket that seals the outer edge for the lower sash of aluminum Kinco windows from about 1993. The "T" shape of the gasket inserts into a thin track along the lower sash outer edge, about a 1/4" from the bottom of the window. The "T" shape measures 3/16". Overall, from the uppe ... (cont.)

Hello, I am having trouble accurately measuring my bubble seal and pile parts. First the bubble seal t slot is very close to your .187 width, BUT the hollow bubble appears to be about .4 inches, not .3 that you sell. Second, the pile weatherseal has a base of about 3/16 inches like your number58-02 ... (cont.)

Any possibility you would have a product solution for replacing the bottom weather seal on an Alcoa brand (ca1996) Vinyl window sash? Thank you.

white bubble kerfed weather strip in bottom of Prism window. 7/16 dia. 3/16 lip

On my tilt type vinyl window, there is a piece on each side that connects the rope to the spring. The spring is connected to the tilt lock guide shoe which connects to the window itself. on both sides, the spring-to-rope piece is broken where it would attach to the spring. i could send a photo but ... (cont.)

I need 16 pieces 54 inches long of the window trim 5 54 long window sill gaskets

Hi I need to replace this piece. Simonton Double Hung. Do these come left and right or are they ambidextrous.

Looking for correct size fir side weather stripping on lower sash windows for side and front bottom ( furthest away from inside) window weather stripping