Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

My window sills get cold, colder than the wall and colder than anyplace I can touch on the window except maybe inside the track. I'd like to try replacing the weatherstripping at the bottom of the window. Could you identify some replacements for me?

Could use 6 pair of clips and 8 window sash seals

I have a piece of foam insulation what was bent out of shape and had to be removed and I'm trying to figure out what to buy to replace it. It snaps into the frame as shown in the photos. Thanks!

Need help in identifying correct T-SLOT OFFSET HOLLOW FOAM SEAL part. Appears 7/8" wide, bulb ~ 3/8 to 1/2" and T ~ 3/16". Pictures attached. Mick

Need help selecting replacement part for this stripping.

T Slot is .187 Bulb is 7/16 Total width is 7/8

Hello, This seal is from a 20 year old American Jewel Double hung vinyl window. It is the bottom seal that meets the lower sash or window sill. I tried to get the best pics possible. I hope this helps idenify it. I could mail it to you as well. Thanks Mike

I am trying to identify a T-Slot window weatherstrip from a house built in 2000. The weatherstripping is all shot and needs replaced. No window manufacturing identification. Per my picture the base of the T is one cm long while the top of the T (which fits into the slot) is 1/2 cm. ... (cont.)

Hello, i'm trying to understand which T seal for my window is the best. I'm not familiar with the measurement terms, so I included pictures of the measurements. Thank you

Hello I'm looking for the bulb weatherseal for the above window.the .187 T-slot bulb weatherseal is not the correct one,the t-slot seems to be correct but the bulb is to small.when measuring the bulb it is 7/8 in diameter.thank you for your help.

This is a flexible plastic strip with a foam filled bead running the length. It is from the lower outside facing edge of A double pane single edge window.

I'm not sure the manufacture of window. Installed in home 2005. Possible MW windows. Photo shows a T channel.

I'm hoping you can help me find replacement weatherstripping for the bottom of my vinyl windows and pile weatherstripping as well. I measured the T and it's 3/16ths and I think I know the product I should order but am also curious what the seals are made of. I live in Wisconsin so the temperatures ... (cont.)

I'm looking for replacement Bulb Seals on 10 Simonton 9800 Impressions vinyl double hung windows. I've included pictures of the bulb seal below. The length of the seal is 28 1/4 inches. Do you have these in stock? If so, what is the price? Thanks, Jim

Hi the weather stripping on our windows needs replacement after 12 years . They slide out from the bottom of the window We will need different lengths but what is the kind that fits our windows?

It is a slide seal on bottom of slash that requires window removal Are you familiar with this one? And do you have a replacement?

Absolutely nothing on the windows who they are made by.

The bulb (about .300 dia) has dry-rotted and broken away from the left edge of the top rail(?). The top rail(?) measures about .400 across. The lower rail(?), that fits into the T-Slot, measures about .270 across.Am I correct in ordering part no. 58-171?Thanks,PJ

I'm hoping you can help me determine what type of seal I need to replace these on all my windows? Windows are about 20-25 yrs old just seals need replacement.Thanks Linda

Looking for bottom window seal for Simonton profinish window. Attached are pictures.