Discussions for 58-183 : SWISCO.com

58-183 is quick and easy to install! Here's how I did it

We bought the 58-183 T slot offset hollow foam seal to replace the aged damaged ones in our Simonton windows. After a little learning curve, these were easy and quick to install. I raised the bottom window by half, pushed up the right side so that side can be disengaged from the frame, pulled it ... (cont.)

What length is your foam filled bulb available in?

Can I buy in a 100' roll?

how to install bubble seal window stripping

we ordeed item #58-182 and are not having any luck getting it into the slot, both sides, we can get one side started but not the other. The ends of the slot in the window are blocked off with the slot from the wool pile that runs vertically so there is no way to slide the bubble seal in from the sli ... (cont.)

Foam bulb weatherstripping replacement for vertical sliding windows

1/4 " x 1/4 " foam-filled bulb 3/4 " overall width Sideways snap-in clip with a hooked end

Window weather seal

Simonton window bottom vinyl weather seal

Vinyl Window Sash Strip

Can't figure out what part this is. Plastic slide-in T-like part measures about 3/16". Bulb is about 3/8".

+1

Bulb-type white weather seal from lower sash

Warranty sticker photo uploaded here.

Bottom sash certainteed bulb style replacement

See attached photos. I am looking for a bulb style replacement for the bottom of the lower sash of a double hung certainteed window.

+1

Window World replacement bottom seals

I have 3 identical windows like this from Window World, sized 46" X 52"? Each window has these two seals on the bottom and is leaking air. I was able to remove one, but on the other one, the 'hairs' keep pulling off and preventing me from sliding it out of the track it is in. The one I got out is 3 ... (cont.)

+2

Vinyl Window Bubble Seal

I'm looking for Bubble Seals for my Vinyl Windows. Windows are Diamond Line 2000 from the Lumber Yard installed in 1999. Seals are dry rotted and I am looking to replace them.

+4

.187 t type seal

These are pictures of the rubber seal of the bottom of my windows on a home we just bought or what's left of them. There's no numbers on it that I can see hopefully it's the .187 t type that you carry. Please let me know. Thanks:Mike Barnhardt

Simonton window weatherstrippinglooking

Looking at the attached photos what stripping do i need?

Alside window parts

First time homeowner, just got keys to my first house. Looking to replace weather seals and the broken parts shown in the image.

+3

I thought this was weather stripping

Apparently it's sash snap-in glazing bead. This snapped in tightly on the bottom of a sash window. The window was installed in 2007 in a new build by Fischer Homes.

+1

Replacement parts

I have a silver line window that I can't seem to find the replacement parts for. I'm looking for the tilt latches for this window as well as the rubber gasket/weatherstripping at the the bottom of the window, as well as the pile weatherstripping on the side of the window. Any help would be greatly a ... (cont.)